Hi Bob, I tried looking at the log in the Z38XX program (in wine), and I just get a blank. So, I brought up Satstat in a Virtualbox and there's nothing of any consequence. There are the entries today when I started moving antenna ports around, and then nothing back till 12/5 when I was trying the attic antenna as a test.
Bob From: Bob Camp <kb...@n1k.org> To: Bob Stewart <b...@evoria.net>; Discussion of precise time and frequency measurement <time-nuts@febo.com> Sent: Wednesday, December 10, 2014 5:04 PM Subject: Re: [time-nuts] KS problem Hi Have you dumped the log file from the KS and seen what it says about the tracking? Bob > On Dec 10, 2014, at 2:13 PM, Bob Stewart <b...@evoria.net> wrote: > > I've been uncomfortable with this KS since I got it; even having to return > the REF-0 unit for comms problems. Now that I have the PRS45A, I think I've > proved that the KS does have a problem. Has anyone else had something like > this plot shows? Any idea what's causing it? I'm not seeing anything like > this on my home-grown unit, but that uses an LEA-6T instead of a UT+. > This plot is the phase difference between the 10MHz from the KS vs the 10MHz > from the PRS45A. The 1PPS from my homegrown unit is being used to trigger > the 5335A which is measuring the time interval. I could switch the trigger > to the KS, but I don't think that would change anything, since it's the phase > between two 10MHz signals that's being measured. Or do I misunderstand how > the 5335A triggering works for TI measurements? I can post the setup > commands for the HPIB if wanted, or even my somewhat convoluted logging > program. > > http://evoria.net/AE6RV/KS/fll.png > > Bob - AE6RV > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.