Just an update. I found that I didn't have another 24 VDC supply, so Mouser to the rescue. The supply arrived today.
I just finished wiring everything up and setting the Lucent boxes next to my Z3801A. When I ordered the Lucent, I also ordered an HP antenna splitter (shouldn't have sold the one I had, years ago). It took 13 minutes from powerup to get the On and STBY lights on. I get a 10 MHz square wave and a 15 MHz sine wave out of REF 0. I just did a couple of quick measurements with my scope triggering on the Z3801A. The 10 MHz from REF 0 was initially low by 1.66e-10. Ten minutes later, it is 2.77e-10 high. Joe Gray W5JG On Wed, Dec 10, 2014 at 5:05 AM, Bob Camp <kb...@n1k.org> wrote: > Hi > > The antenna connectors on the front of the KS box are TNC's .... > > Bob > >> On Dec 9, 2014, at 9:13 PM, Joseph Gray <jg...@zianet.com> wrote: >> >> Paul, >> >> Thanks for the info. I have been following most of the discussion on >> these units. I have even saved several posts, so that I could >> reference them once I had one of these. >> >> I do plan on letting it cook for quite some time. I will certainly >> check it via serial port to make sure everything is OK before the 30 >> day warranty is up. >> >> I just dug up some SMA to BNC pigtails I still need to find a 24 VDC >> supply (I think I have one), make a power cable, move some things to >> make a space for this thing, etc. >> >> Joe Gray >> W5JG >> >> >> On Tue, Dec 9, 2014 at 6:22 PM, paul swed <paulsw...@gmail.com> wrote: >>> Joe since the lucents are most likely NOS you will need to let it cook in >>> 30 days. I now have two units and they do match up well to the 3801. But >>> they did need to age. Just a heads up. >>> It is nice to see them line up pretty well. >>> Regards >>> Paul >>> WB8TSL >>> >>> On Tue, Dec 9, 2014 at 7:37 PM, Joseph Gray <jg...@zianet.com> wrote: >>> >>>> I think I have finally graduated to Junior Time Nut. I now have three >>>> GPSDO's. The trusty Z3801A I have had for years. The LTE-Lite is >>>> recent. The Lucent 2-box unit just arrived today. Maybe I'll finally >>>> know what time it is :-) >>>> >>>> This Lucent is much smaller than I thought it would be. Slightly wider >>>> than the Z3801A, but much shorter. Smaller is good. >>>> >>>> Now I need to find a 24 VDC supply and an empty space to put the new GPSDO. >>>> >>>> >>>> Joe Gray >>>> W5JG >>>> _______________________________________________ >>>> time-nuts mailing list -- time-nuts@febo.com >>>> To unsubscribe, go to >>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>>> and follow the instructions there. >>>> >>> _______________________________________________ >>> time-nuts mailing list -- time-nuts@febo.com >>> To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. >>> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.