I have the following instruments on my GPIB bus:
Tektronix 2712 spectrum analyzer
HP 3586b selective voltmeter
Racal Dana 1992 counter
Advantest U3641 specturm analyzer (currently inop/offline)
I am using a 64 bit Fedora Linux and a PCI card to run this 50 year old
protocol.
The card cost more than the motherboard and CPU.
Do a Google on Linux GPIB.
Over the last week I have been using the 2712 and the GPIB bus to
store the output of the spectrum ananyzer.
You can download my gpib stuff from ftp.omen.com
On 01/22/2015 04:52 AM, Chris Howard wrote:
I have used the Prologix USB GPIB device with mine.
On 1/22/2015 6:14 AM, christophena...@virgilio.it wrote:
Hello everybody,
i am looking for an interface pc card for a Racal-Dana Model 1992 Nanosecond
Universal Counter Timer 1.3 GHz.Please could someone give me some suggestions
about a card that might suite this counter?
I was told that a GIPB-USB interface controller should work (for instance
ADLINK usb-3488A IEEE-488) but i'd like to be 100% sure.Has someone maybe
direct experience with that?
Thanks in advance and best regards,
Chris Nacci
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
--
Chuck Forsberg WA7KGX c...@omen.com www.omen.com
Developer of Industrial ZMODEM(Tm) for Embedded Applications
Omen Technology Inc "The High Reliability Software"
10255 NW Old Cornelius Pass Portland OR 97231 503-614-0430
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.