Hi there I've come across the following resources for the one I was fooling with...
Here, on the archive of this list: https://www.febo.com/pipermail/time-nuts/2008-June/031663.html Some more information: http://www.leapsecond.com/museum/fei5650a/ A really good PDF here: http://www.dd1us.de/Downloads/precise%20reference%20frequency%20rev%201_0.pdf A datasheet with more information on the hexadecimal frequency setting: http://www.analog.com/media/en/technical-documentation/data-sheets/AD9830.pdf Hope some of this helps! -Randal "r3" of CubeCentral -----Original Message----- From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of EB4APL Sent: Friday, 19 June, 2015 10:30 To: Discussion of precise time and frequency measurement Subject: [time-nuts] FE-5680A commands Hello, I was wondering if anybody has the full command set for this Rb oscillator. I know that FE-5680A means very different things and some commands are unit type dependent, but I think that there should be commands to monitor some health data, something similar to the LPRO-101 and FRS-C which have analog outputs of the lamp and oscillator voltages. Also since this unit has a 1PPS output, maybe a means of steering it is built in. I have the FE-5680A Calibrator program by Bob Campbell VK4XV, but it only uses the offset commands, maybe others have developed other programs or at least have the command info. Regards, Ignacio EB4APL _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.