Hi One of the most interesting things about the last paper mentioned: > On Jun 19, 2015, at 8:57 PM, Charles Steinmetz <csteinm...@yandex.com> wrote: > > Rick wrote: > >> However, a better tutorial would be the one written by >> HP's Dieter Scherer which was published in Microwaves >> & RF Magazine (or possibly Microwave Journal). I believe >> the same content was available from HP as an Ap Note or >> something. > > I suspect the paper you are referring to is: > > Design Principles and Test Methods for Low Phase Noise RF and Microwave > Sources (Scherer, 1978) > > It is available on Didier's site at: > > <http://www.ko4bb.com/manuals/download.php?file=03_App_Notes_-_Proceedings/Scherer_Low_noise_source_design_and_test.pdf> > > There are two other Scherer papers there: > > Generation of Low Phase Noise Microwave Signals (Scherer, 1981) > <http://www.ko4bb.com/manuals/download.php?file=03_App_Notes_-_Proceedings/Scherer_Low_PN_Signal_Generation.pdf> > > The "Art" of Phase Noise Measurement (Scherer, 1985) > <http://www.ko4bb.com/manuals/download.php?file=03_App_Notes_-_Proceedings/Scherer_Art_of_PN_measurement.pdf> > ^^^^^^^^^ this one
> Best regards, > > Charles > is that it has a phase noise plot on an open loop microwave source down to 10 Hz. Not quite the VCO Jim was looking for, but close …. Bob > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.