Hello again, First off, I want to thank everyone who replied direct and through the group regarding my recent 10 MHz square to sine wave conversion info request.
I obtained a mini-circuits 10.7 MHz low pass filter from Ebay cheap enough and I also plan on "rolling my own" based on some of the information and links provided in your generous replies. Part 2: With things in place, I actually looked at the actual square wave output port with a decent scope to see it's not even close to being symmetrical. The waveform on-portion (duty cycle) appears (surprising to me) to be much less than 20% Now I'm under the assumption that proper rounding or conversion of the non symmetrical 10 MHz square to a sine wave will be a bit more involved. Before I launch toward part two of this latest saga, I'd really be interested in reading suggestions and comments regarding methods to improve/fix the 10 MHz waveform symmetry. Again, thank you in advance for your replies... Regards, skipp skipp...@yahoo.com _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.