On 3/24/2016 1:08 PM, Bob Bownes wrote: > Don't really need anyone who can order up bare boards in bulk anymore. Oshpark; www.oshpark.org does 2 layer for $5/sq in and 4 layer for $10/sq. That price gets you three boards. Designs can be made public so anyone can buy them. I buy from them all the time. About 2 weeks turn.
There are several Chinese suppliers that will do 2 X 2 inch boards for about $20 for 10 copies, about $30 by the time you have them in your hands. Also about 2 Weeks turn, though may end up as much as 4 weeks. > Many > of the board houses will make them on demand for single customers. They fit > them into empty spaces in larger board orders. > > I'd love one if someone is willing to draw it up. I'll even put together a > Mouser BOM that can be shared if N8UR will layout the board. :) If we can hash out a schematic, I can do a layout as a spare time project - but I don't have a huge amount of spare time in the plan before June or July. I'd use KiCAD We can do a public BoM on Digikey or Mouser so folks in the EU most of the rest of the world have easy access. There are few questions I have - surface mount or through-hole. Through hole parts are getting harder to get. If you are afraid of SM we have have a low cost service like Macrofab build small batches (they'll do as few as one) and if we use parts from their standard parts list we only pay the part cost, not the insertion cost. They'll also buy boards from Oshpark. If you are not afraid of SM, buy a stencil from Oshstencils https://oshstencils.com and get your hotplate out. Connectors: SMA are cheap and reliable. More delicate than TNC, but not by much, and a whole lot cheaper and more available as surplus. > Bob > KI2L Oz, N1OZ -- mailto:o...@ozindfw.net Oz POB 93167 Southlake, TX 76092 (Near DFW Airport) _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.