Or put another way think 4 layer boards with power and ground planes. Dave
-----Original Message----- From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of ed breya Sent: 17 April 2016 21:04 To: time-nuts@febo.com Subject: Re: [time-nuts] 1 PPS 50-ohm driver For high-drive outputs, my favorite is the 74AC541 octal bus driver, which is very nice for paralleling outputs through small series Rs. If you look at the pinout, you'll see why. BTW with any of these high-drive circuits, it is essential to provide good bypassing of the supplies, and be sure of clean low impedance pathways for the signal output and return currents. Ed _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.