The parts appear to be there, it just doesn't run. Tom Holmes, N8ZM
-----Original Message----- From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Graham Sent: Tuesday, May 17, 2016 7:48 PM To: time-nuts@febo.com Subject: Re: [time-nuts] FS HP 5335A Does not have the basic internal timebase or doesn't have the OCXO timebase? I have one in which I put an OCXO and required snipping/removing a jumper on the main board to disconnect the onboard timebase. Perhaps some where sold with OCXO only and never had an onboard timebase on the main board. I have messed about with about a dozen 5335's and all had an onboard timebase on the main board. I guess the variations of near endless. cheers, Graham ve3gtc On 2016-05-17 21:38, Tom Holmes wrote: > For some reason it did not have an internal timebase when I got it, and > throws an error, UNLESS you have an external 10 MHz connected before you > turn it on. Then it works fine. > > > > Please contact off list for details, > > > > AND if you happen to be in Dayton, OH, this weekend for a little ham radio > swap fest with a mere 25,000 people attending, no shipping required. > > > > AND there will be at least a few known time-nuts in town if anyone wants to > meet up. Make yourself known to John at the TAPR booth. > > > > Tom Holmes, N8ZM > > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.