DHCP is handy to provide the IP address and specify which NTP server to
use. Using DHCP I don't need to setup all the network settings for my
project. The NTP packet parser itself is really small and doing its duty
very well. Using such setup, it gives me flexibility to choose the
different NTP servers as a time source. It could be my own NTP or it
could be NTP pool.
On 2016-07-12 16:21, Hal Murray wrote:
t...@patoka.org said:
In addition, even MCU has not enough resources to handle TCP/IP, DHCP
and
NTP, it is some solutions available to outsource it to dedicated
chips. I
was using WIZ5100 (assembled as a modules) with great success.
NTP is pretty simple. If you are willing to take a few shortcuts,
things get even simpler. If you have a NTP server on your LAN, you
can skip routing and DHCP by broadcasting a request. It would be
interesting to see how small you could make a set-the-time package.
The Xerox Alto had an Ethernet boot loader in microcode. (and space
in the microcode ROM was tight) When bringing up a new machine, we
figured out that it was much simpler and faster to debug the Ethernet
before the disk controller. The debugger worked over the Ethernet.
That gave you a solid place to stand early in the debugging process.
--
WBW,
V.P.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.