On 26/08/16 06:33, Hal Murray wrote:
billm...@gmail.com said:
Skin depth is probably a good place to start with in roughly estimating the
thickness needed. In copper at 50 Hz, ...
Is skin depth an appropriate concept for magnetic shielding? Or does it get
messed up by saturation?
Skin depth is appropriate for an electromagnetic field. It doesn't
apply for a static electric or magnetic field but does apply for a
varying magnetic field. Without going into the details of
electromagnetic field theory, the mechanism is that the varying magnetic
field induces a current in the conductor (copper under consideration
here) and that this current in turn produces a magnetic field which
opposes the original magnetic field. Strictly magnetic effects, e.g.
ferromagnetism, play no part in this scenario and hence saturation is
not an issue.
If the conductor also has magnetic properties (e.g. if iron were used)
then magnetic saturation could be an issue.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
