Hi, I managed to get one of these Lucent boxes from a local ham that moved away a couple years back. I finally got around to modifying it today with Skip Withrow's mod to add 10 MHz output. I connected an antenna and after a few minutes the yellow and No GPS and Fault LEDs go out and the green Online LED comes on. I put my scope on both the 15 MHz out and the new 10 MHz out port and get no output. Before I dig into this with my scope tomorrow night, is it as something as simple as a signal I'm missing to enable the outputs? I only have the antenna connected and two pins for 24 VDC, nothing else. Thanks for the bandwidth.
Chris KD4PBJ _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.