Hi These days, a RS-422 to USB adapter is a sub $20 item, even from a “name brand” outfit with real drivers. . If you shop a bit, you can get some dirt cheap USB to 422 adapters at the risk of having issues with the drivers (now or down the road).
Bob > On Sep 13, 2016, at 11:44 PM, Chris Waldrup <kd4...@gmail.com> wrote: > > Hi, > > Regarding the Lucent box- I wanted to let everyone know that once it locked > to satellites, I have a 10 MHz out. > The output was a square wave with some ringing, but I built a three element > low pass filter and now I have a really nice 10 MHz sine wave. > Thanks to all! > > Last question.... I see it has a RS-422 output on one of the connectors. If I > build or buy a 422 to 232 converter can I expect to be able to view the > unit's data output with something like Lady Heather or Tboltmon? Or at least > see an output with Hyperterminal? > > Thank you. > > Chris > KD4PBJ > >> On Sep 6, 2016, at 16:42, Bob Camp <kb...@n1k.org> wrote: >> >> Hi >> >> One might *think* a redundant system would work fine with the plug yanked. >> In this case …. nope. It needs to have a dummy connector on it to get the >> device >> running. I agree that this is an “interesting” way to do it. Regardless of >> that, they >> did the units need the signals from the other box (or fake signals) before >> they >> will do useful stuff. >> >> Bob >> >> >>> On Sep 5, 2016, at 10:22 PM, Bill Hawkins <bill.i...@pobox.com> wrote: >>> >>> Fake connections? Isn't a redundant system supposed to allow one box to >>> be disconnected? >>> >>> Bill Hawkins >>> >>> -----Original Message----- >>> From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Bob >>> Camp >>> Sent: Monday, September 05, 2016 8:20 PM >>> To: Discussion of precise time and frequency measurement >>> Subject: Re: [time-nuts] Lucent RFTFm-II-XO >>> >>> Hi >>> >>> If you only have one box, you need to be sure the "fake" connections on >>> the interconnect are correct. If they are not, you will not get it to >>> operate correctly. >>> >>> There also is a survey process if you have not had it running in your >>> location before. That could take a few hours to a few days depending on >>> your antenna. >>> >>> Bob >>> >>> >>> _______________________________________________ >>> time-nuts mailing list -- time-nuts@febo.com >>> To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.