Hi I have had no problem using the PPS out of any of the Lucent boxes. They trigger counters fine and a one shot stretches them to any length you might need.
Bob > On Sep 22, 2016, at 8:31 AM, Bill Riches <bill.ric...@verizon.net> wrote: > > Be careful of the pps output from the dual lucent boxes. Tried to use it to > sync SL and found that it is a weird non-standard pulse and would not work > even with a pulse stretcher as it looked too narrow. I use the pps output > from a Jackson unit and it syncs SL fine. > > 73, > > Bill, WA2DVU > Cape May > > -----Original Message----- > From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Hal Murray > Sent: Thursday, September 22, 2016 2:07 AM > To: Discussion of precise time and frequency measurement > Cc: hmur...@megapathdsl.net > Subject: Re: [time-nuts] Lucent RFTFm-II-XO > >> Is there a pinout posted somewhere for the Lucent box RS422 D sub 9 >> connector? > > It's in the mail archives. Google for something like >time-nuts RS422 pinout< > > If you are interested in timing, you want the PPS signal too. (It won't be > great over USB, but it might be fun to play with. You can get your own > hanging bridges.) > > > > -- > These are my opinions. I hate spam. > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
