Alberto, If you want to always use COM3 you can edit the properties for the shortcut you use to activate LH. That way just clicking on the LH icon will start the program on the correct COM port. That is more convenient than using the command line every time. Here is how to do this:
Right click on the Lady Heather icon. At the bottom of the list, click on "Properties". You will see a number of tabs. Click on the "Shortcut" tab. In the "Target" text box you should see "C:\Heather\heather.exe" if you installed LH on the C: drive. If that is the case just add " /3" for COM3, that is a space followed by /6, to the end of the line. It should look like this: C:\Heather\heather.exe /3. Note that there is a space between .exe and the "/". Click 'OK". Now when you click on the LH icon it will use COM3. Ken WA2LBI On Sun, Oct 30, 2016 at 4:57 PM, Alberto di Bene <dib...@usa.net> wrote: > On 10/30/2016 4:15 PM, Richard Mogford wrote: > > I read that to change the COM port in Lady Heather, you type “/“ and then >> the COM port number, such as 3. So you enter “/3” to change to COM 3. >> >> i tried this, but it does not seem to change the input COM port from 1 to >> 3. >> > > > Maybe I am wrong, but, if memory serves, you can only choose between COM1 > and COM2. Higher port numbers > are not accepted. > > 73 Alberto I2PHD > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
