Hi All,
Just ordered a few of these BME280 sensor boards. Also ordered a FTDI
C232HM cable to try to SPI or to bit-bang data from the board directly
to the PC. If a PIC or similar is required, does anyone on the list have
16Bit PIC code (pic24/dsPIC) C code for reading these BME280 sensors
laying around?
They really look like a neat little unit. Thanks to all for the heads up
on these ones!
Dan
On 1/4/2017 12:00 PM, time-nuts-requ...@febo.com wrote:
Message: 7
Date: Wed, 4 Jan 2017 09:53:24 -0000
From: "David J Taylor" <david-tay...@blueyonder.co.uk>
To: "Discussion of precise time and frequency measurement"
<time-nuts@febo.com>
Subject: Re: [time-nuts] Temperature (environmental) sensors
Message-ID: <076CCA551DC142C2A8D93CF02A4AD1A3@Alta>
Content-Type: text/plain; format=flowed; charset="UTF-8";
reply-type=original
I like the Bosch BME280 conneced to a Raspberry PI.
https://learn.adafruit.com/adafruit-bme280-humidity-barometric-pressure-temperature-sensor-breakout/pinouts
https://github.com/adafruit/Adafruit_Python_BME280/blob/master/README.md
-- Björn
========================
Some performance plots are here, with some comparison between the pressure
readings from various sensors.
http://www.satsignal.eu/mrtg/performance_air_temp.php
This is on mixed Windows/Linux platforms.
Cheers,
David
-- SatSignal Software - Quality software written to your requirements
Web: http://www.satsignal.eu Email: david-tay...@blueyonder.co.uk
Twitter: @gm8arv
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
