All,
   the similar problem I have verified using the HP5065A and HP5061B 1PPS 
output, the dividers are pratically unusable for ADEV measurements. The 5/10MHz 
output of the same instruments using the TAPR divider are ok, so these dividers 
have some spike noise problems. It can be seen even using other TIC as The 
HP53132A.
   Luciano
   www.timeok.it


   Da "time-nuts" time-nuts-boun...@febo.com
   A "Discussion of precise time and frequency measurement" time-nuts@febo.com
   Cc
   Data Sun, 19 Mar 2017 20:03:29 -0700
   Oggetto Re: [time-nuts] ADEV query Timelab and TICC
   > I have sent a couple of files to Tom. They were taken simultaneously from
   > an LTE Lite - one from the PPS and one from a PicDiv dividing the 10MHz to
   > 1Hz. The glitches were on the PPS trace, but not on the PicDiv trace, so
   > I'm fairly confident the TICC was working correctly.
   >
   > Orin.

   Hi Orin,

   Thanks for the raw data. It's very nice (2 hours 16 minutes = 8219 points). 
Everything looks fine with the exception of 8 glitches. These are sometimes 
obvious jumps in phase, which cause massive spikes in frequency. Two plots 
attached.

   Almost every data point is within a few ns of each other. This is good. The 
standard deviation is a fraction of 1 ns. But once in a while there is a 
relatively massive phase jump. This is bad. Interestingly these 8 phase jumps 
all appear to be about 25 ns or a multiple of 25 ns in magnitude. The full list 
is (ns units):

   24.575
   24.724
   24.831
   25.047
   25.087
   25.549
   25.589
   49.623

   25 * N ns is not random. So I think this is not a Windows problem, not a USB 
problem, not a TimeLab problem, not a TICC problem either.

   It makes me wonder if this is a LTE-Lite problem. If Said or Keith from 
Jackson Labs is around -- is there anything on the LTE-Lite board that's close 
to 20 or 40 or 80 MHz? At this point I kind of trust Orin's data and I kind of 
trust the TICC. So when I see monster 25 ns phase jumps it makes me think 
there's a problem with the GSPDO board itself.

   (Please realize that only on time-nuts may we can use the words "monster" 
and "25 ns" in the same sentence; the rest of the world has larger problems)

   /tvb
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to