My NTGS50AA is suddenly lacking the ability to communicate. It's been
working fine for months, but I was trying a few things with my Raspberry
Pi NTP server.
Had GPSD accessing the NTGS50AA through a ch340 USB to serial adapter.
Found out Lady Heather displays much less info when connecting through
GPSD, so I went back to LH connecting directly to NTGS50AA through ch340
adapter on windows 7. Curiously, it was surveying, not in position lock.
So, I did a hard reset. Never heard from it since :(
If it's unplugged, all the lights behave as they should when you power
it up again. "Locked" light eventually comes on. PPS still works. Just
no serial. Even tried Trimble Studio with auto detect settings, no
connect here either. I've tried a second ch340 USB to serial adapter,
same deal. Any suggestions?
Thanks
Ed
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.