So the STM App note An-4776 teaches how to use an external clock and it looks pretty accurate in implementation. I’ve read thru the code and it looks easy to implement. Now I just need to bring another signal in and count it. I’ll be working on some code this afternoon to implement the method.
I also found a 5335 for cheap and ordered it. It was listed on eBay as being in “excellent” condition though both pictures had all the lights lit so I can only assume it is stuck in power on reset or test. I’ll see when it gets here. As far as measurement techniques, if I use my scope and sync to a known signal using the trigger on my 3336, it looks like I can measure to .001hz pretty reliably. So using the STM application, the 5335 and the scope + 3336, I should be off and running. I’ll report back in a few days. Jerry _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
