Hi If you are running into a TBolt, it’s got an F connector and 75 ohm cable spec’d already …. The 50 ohm / 75 ohm thing didn’t seem to bother Trimble. They certainly looked at it before going that way ….
Bob > On Sep 4, 2017, at 12:31 AM, Ian Stirling <i...@opus131.com> wrote: > > On 09/02/2017 02:57 PM, Clay Autery wrote: >> Having decision-making problems for the materials for my GPS main >> feedline. Going to use a TM LMR stock, just can't decide how big to go >> with it... > > I have a modest 26dB antenna on a six feet pole of plastic piping, the > piping is > strapped to my deck post. The antenna is probably ten feet high added to my > deck. > I use a 40' RG6 that my Comcast chap overestimated, and he said, "Just use it > as you need." > I measured the theoretical 1.4 SWR with as pretty much dead on. So long as my > GPS boxes > agree with consumer time, as measured by the cheap "atomic" clocks from super > cheap vendors, > I am happy with the set up. I have no need of phase and jitter, so long as > they average out. > > I just had to buy some "F" connectors and use adapters to convert to the GPS > 50 ohm inputs. > Works like a charm. And good enough for me. > > Best wishes, > Ian, G4ICV, AB2GR > -- > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.