-------- In message <[email protected]>, Ulf Kylenfall via time-nuts writes:
>The meter is not stable and the needle is somewhatnervous. When tapping the >instrument with a smallscrewdriver, this value jumps up and down. If the jumps are always the same place on the scale, it is probably a mechanical issue in the meter, if it is all over the scale it could be the rotary switch which selects what the meter shows. -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 [email protected] | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
