Hi Quick and simple on the XOR doubler:
Buffer up your square wave. Output goes direct to one input of the XOR. Other input goes through a filter to give you a phase shift. Low pass is one option. Band pass is another option. Both benefit from being tunable. Net result is that you can get the sub-harmonics down to about the -40 db level. Phase noise will floor out at whatever the floor of the logic you use is. ( = it’s not magic) Bob > On Sep 8, 2017, at 9:59 PM, Chris Caudle <[email protected]> wrote: > > On Fri, September 8, 2017 5:15 pm, Charles Steinmetz wrote: >> Depending on your application and its tolerance for jitter/PN, you may >> want to use a fast analog comparator to do the initial sine-square >> conversion. > > I think there have been several discussions on squaring circuits, I was > more interested in the XOR doubler. That seems like it might be pretty > simple to implement since I will have power supplies for CMOS gates easily > available. I don't remember seeing discussions on that technique. > > -- > Chris Caudle > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
