Talking about Furuno has any one looked at the GT-87. I have known about it for years but found no way to buy some now DigiKey has them for $ 100, Buerklin in Germany for half that price. Saw tooth is +- 1.7 nsec we are not going to bother with correction. We are in the process to lay out a board any recommendations are appreciated Bert Kehren In a message dated 2/15/2018 12:39:48 AM Eastern Standard Time, hol...@hotmail.com writes:
I just did a small adapter board that converts the 2x5 pin 2mm header on the Furuno GT-8031 to a 1x9 pin 0.1" connector with the pinouts of the Adafruit Ultimate GPS. There a couple of minor pin differences... the Adafruit FIX pin is not used and the Adafriuit 3.3VREG output pin is used as the Furuno antenna power connection. The Furuno can be soldered to the board or a female connector could be installed. I'm getting ready to order a few boards. If interested, contact me off list._______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. 1 Attached Images _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
