Hi Even more exciting, some of the “M12 like” devices are close, but not exact copies of the M12 command set. Your GPSDO may be fine with the differences on this device, but not so happy with the differences on some other device.
Bob > On Feb 16, 2018, at 12:50 PM, Mark Sims <hol...@hotmail.com> wrote: > > No, the Tbolt does not have a separate receiver board... plus its' GPS is > rather special... the RF chain is locked to the OCXO so it does not produce > any sawtooth error. > > The Lucent KS firmware expects the GPS to support the older 6/8 channel > messages. The newer 12 channel messages are different. > > BTW, I just did a Motorola M12 to Adafruit pinout board. The M12 form factor > and pinouts are also used by a lot of other timing receivers. Why Adafruit? > Because it is breadboard friendly, has enough pins for all the signals that > one expects, and my GPS to RS-232 adapter board has an Adafruit connector on > it. > > ---------------- > >> Never having opened my TBolt, are the GT-8736 boards of use to replace the >> aging and partly deaf receiver in that? Or for a KS-24019? > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
