Hi

Actually the manual is moot on any sort of remote control. The RS-232 section 
refers you to an insert 
in the back of the manual. I’d guess that the 488 stuff was done the same way. 

Nasty question: Are you sure you have the 488 option installed?  It would not 
be the first piece of gear 
produced that never really got a 488 firmware version …..

Bob

> On Apr 7, 2018, at 11:11 PM, Tom Leedy via time-nuts <time-nuts@febo.com> 
> wrote:
> 
> 
> Hi:
>  
> I am looking for the IEEE-488 codes and formats for a Datum 9700AT 
> Programmable Time System.  The 9700AT is a 1U time generator and translator 
> with slots in the back that can accept option cards with various 
> functionalities such as -488 and RS-232 interfaces, GPIO, and tape searches.  
> What I need is the character strings to output the time for the -488 
> interface.  The manual for the unit is here: 
> http://www1.symmetricom.com/media/files/support/ttm/product-manual/man-9700at-9710.pdf
> However, it is silent on the details of the -488 interface.
>  
> Any help would be appreciated and feel free to contact me offline.
>  
> Many thanks!
>  
> Tom Leedy
> Clarksburg, MD
>  
>  
> _______________________________________________
> time-nuts mailing list -- time-nuts@febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to