Phase noise is (usually) more important than absolute frequency accuracy. I suggest some kind of low phase noise master oscillator (OCXO) feeding a DDS without an internal multiplier.
If internal multiplier in DDS, that, rather than the frequency reference source will set the phase noise floor of the sampling. --- Graham == On Wed, Apr 11, 2018 at 11:00 AM, Jerry Hancock <je...@hanler.com> wrote: > For and RSP? I used an HP 3325 locked to my Cs beam and took the signal > from the back. I think I paid no more than $100 for the 3325a and one I > got for free. > > Regards, > > Jerry > > > > On Apr 11, 2018, at 4:49 AM, jster...@att.net wrote: > > > > Leo Bodnar GPSDO - adjustable Low-jitter GPS-locked precision frequency > reference 400 Hz to 810 MHz . He has a new one, single output for 99 > british pounds. > > > > Jerry NY2KW > > > > -----Original Message----- > > From: time-nuts <time-nuts-boun...@febo.com> On Behalf Of Pete > Lancashire > > Sent: Wednesday, April 11, 2018 6:00 AM > > To: Discussion of precise time and frequency measurement < > time-nuts@febo.com> > > Subject: [time-nuts] suggestions on getting 24 Mhz ? > > > > Needed for SDR project as external clock source. > > > > -pete > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > > > --- > > This email has been checked for viruses by Avast antivirus software. > > https://www.avast.com/antivirus > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.