On Wed, May 23, 2018 at 5:17 PM, Mark Sims <hol...@hotmail.com> wrote: > I recently got in a Ublox M8T board in from CSGSHOP. The M8T supposedly > outputs raw measurements (carrier phase, pseudorange, doppler) for all the > sat systems it supports, but I am only getting raw measurements for GPS and > SBAS... no Glonass or Galaileo. Any ideas why? Has anybody gotten raw > data for GLONASS or Galileo out of a M8T:
Mark, I think you need to look at the CFG-GNSS message to enable the constellations that you want. RTKLIB has a data/ubx_m8t_glo_raw_1hz.cmd command file for enabling GLONASS so this could give some pointers. (I've not tested this since my LEA-6T only supports GPS+SBAS) Tim _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.