The power supply is auto sensing and spec'd at +24V or -48V, which implies the polarity would be the same in either case, but the auto sensing doesn't seem to imply sensing right across that range. 24 V range is 22 to 28 V at 6A, -48V range is -40.5 to -57V at 3A, I don't recall checking what might happen at say 35 V, for example, I'd probably called it quits long before getting into that sort of detail:-)
Anyone looking to play with these might want to check the archives for the post from Paul (K9MR) on 6th May 2017. Nigel, GM8PZR The outside of the box specs current need at 24vdc and 48vdc. Does the Power Supply recognize the voltage level or do I need to dig into it further ? Thanks, Dick, W1KSZ _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
