Yes :-) another one of mine:
< http://www.hoffmann-hochfrequenz.de/downloads/iso_amp.pdf >
It is based on a NIST design and made from discrete transistors.
Unfortunately it also needs RF PNP transistors that are slowly going the
way of the Dodo.
Luckily, I still have a reel of BFG31.
regards, Gerhard
Am 17.03.19 um 19:00 schrieb Anders Wallin:
I've tried to collect links to frequency/pulse distributor designs over
here:
https://www.ohwr.org/project/pda-8ch-fda-8ch/wikis/Similar-Projects
if something good is missing let me know!
AW
> But how do I do this
on 10MHz side? I'd like to have minimal distortion
(sine wave) and high isolation. I acquired a few signal
splitter and monolithic amplifiers. Split first and
amplify? Amplify first and split? Remember it's only
2 to 3 channels. Amplifier module has too much gain, so
I'll probably have to use attenuators.
>
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
