I’m late to the party, but my go-to antenna is the Gilsson marine antenna. If it has a downside, it’s that it has a flat top instead of a cone. I’ve got one mounted outside at our vacation home near Lake Tahoe, so we’ll see whether snow loading becomes a problem shortly. The fix would presumably just be a 3D printed plastic gnome’s cap, though even that might not be useful if we get snow like we did last year.
It has a standard 14 tpi 1” standard thread, though I’ve managed to make do on more than one occasion with 3/4” NPT. Under normal circumstances, I routinely get 8 or more satellites with the top SNRs in the 50s. I designed a 3D printed mount for mounting it on a flat surface (which I needed to do here): https://www.thingiverse.com/thing:3664978 <https://www.thingiverse.com/thing:3664978>. > On Aug 30, 2019, at 11:35 AM, Denny Page via time-nuts > <time-nuts@lists.febo.com> wrote: > > Could be. They sell a aluminum mounting rod for use with a magnetic base > which mates with the unit perfectly, so I sorta assumed it was intentional. > Tapering helps prevents over tightening / over extension which could damage > the casing. > > Denny > > >> On Aug 30, 2019, at 10:49, Bryan _ <bpl...@outlook.com> wrote: >> >> Or a mfg. defect and thus why on the surplus market. >> >> -=Bryan=- >> >> ________________________________ >> From: time-nuts <time-nuts-boun...@lists.febo.com> on behalf of Denny Page >> via time-nuts <time-nuts@lists.febo.com> >> Sent: August 29, 2019 7:39 PM >> To: Discussion of precise time and frequency measurement >> <time-nuts@lists.febo.com> >> Cc: Denny Page <dennyp...@me.com> >> Subject: Re: [time-nuts] GPS Antennas >> >> I think several people have run into that issue, including myself. It seems >> designed for a slightly tapered rod. Easy to fix with the right tool. >> >> Denny >> >>> On Aug 29, 2019, at 16:41, Ben Hall <kd5...@gmail.com> wrote: >>> >>> Only issue with mine was that the thread wasn't fully cut, so I modified an >>> old taper tap to be a bottoming tap with the bench grinder and finished >>> tapping the hole to the bottom. > > > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.