time-nuts
Thread
Date
Earlier messages
Later messages
Messages by Thread
[time-nuts] Re: What time difference to expect from two clocks using internal GPS receivers?
Magnus Danielson via time-nuts
[time-nuts] Microcontroller based frequency divider
Simon Merrett
[time-nuts] Re: Microcontroller based frequency divider
Clint Jay
[time-nuts] Re: Microcontroller based frequency divider
Simon Merrett
[time-nuts] Re: Microcontroller based frequency divider
Gilles Clement
[time-nuts] Re: Microcontroller based frequency divider
use...@teply.info
[time-nuts] Re: Microcontroller based frequency divider
Simon Merrett
[time-nuts] Re: Microcontroller based frequency divider
ghf
[time-nuts] Re: Microcontroller based frequency divider
Bruce Griffiths
[time-nuts] Re: Microcontroller based frequency divider
Marek Doršic
[time-nuts] Re: Microcontroller based frequency divider
Tom Van Baak
[time-nuts] A little report from EFTF-IFCS 2022
Magnus Danielson via time-nuts
[time-nuts] Pi Pico MSF Receiver
Nigel gm8pzr via time-nuts
[time-nuts] Frequency Mixers
John Moran, Scawby Design
[time-nuts] The Newest Second: NIST-F2
Brooke Clarke via time-nuts
[time-nuts] Re: The Newest Second: NIST-F2
Tom Van Baak
[time-nuts] Can the ADEV of a GPSDO output ever be lower than the minimum of the ADEV of the internal oscilator and the ADEV of the GPS PPS?
Erik Kaashoek
[time-nuts] Re: Can the ADEV of a GPSDO output ever be lower than the minimum of the ADEV of the internal oscilator and the ADEV of the GPS PPS?
André Balsa
[time-nuts] Re: Can the ADEV of a GPSDO output ever be lower than the minimum of the ADEV of the internal oscilator and the ADEV of the GPS PPS?
André Balsa
[time-nuts] Re: Can the ADEV of a GPSDO output ever be lower than the minimum of the ADEV of the internal oscilator and the ADEV of the GPS PPS?
Erik Kaashoek
[time-nuts] Re: Can the ADEV of a GPSDO output ever be lower than the minimum of the ADEV of the internal oscilator and the ADEV of the GPS PPS?
Bob kb8tq
[time-nuts] Re: Can the ADEV of a GPSDO output ever be lower than the minimum of the ADEV of the internal oscilator and the ADEV of the GPS PPS?
Markus Kleinhenz via time-nuts
[time-nuts] Re: Can the ADEV of a GPSDO output ever be lower than the minimum of the ADEV of the internal oscilator and the ADEV of the GPS PPS?
Attila Kinali
[time-nuts] Re: Can the ADEV of a GPSDO output ever be lower than the minimum of the ADEV of the internal oscilator and the ADEV of the GPS PPS?
Attila Kinali
[time-nuts] Re: Can the ADEV of a GPSDO output ever be lower than the minimum of the ADEV of the internal oscilator and the ADEV of the GPS PPS?
Bob kb8tq
[time-nuts] Re: Can the ADEV of a GPSDO output ever be lower than the minimum of the ADEV of the internal oscilator and the ADEV of the GPS PPS?
Magnus Danielson via time-nuts
[time-nuts] Simple Octave GPSDO simulation with freq, phase and ADEV plots
Erik Kaashoek
[time-nuts] FE5650A information?
Richard Rudd
[time-nuts] TICC Question
Graham / KE9H
[time-nuts] Re: TICC Question
John Ackermann N8UR
[time-nuts] Underlying math of cross-correlation PN Test Sets
Joseph Gwinn
[time-nuts] Re: Underlying math of cross-correlation PN Test Sets
Magnus Danielson via time-nuts
[time-nuts] Tuning GPSDO PID loop with sliders using simulation
Erik Kaashoek
[time-nuts] Baby steps of a future timenut
Erik Kaashoek
[time-nuts] Re: Baby steps of a future timenut
paul swed
[time-nuts] GPS Control Loop
ew via time-nuts
[time-nuts] Re: GPS Control Loop
André Balsa
[time-nuts] Re: GPS Control Loop
ASSI
[time-nuts] Re: GPS Control Loop
Lux, Jim
[time-nuts] Re: GPS Control Loop
ASSI
[time-nuts] Re: GPS Control Loop
Bob kb8tq
[time-nuts] NTP server source needed
Paul Watts
[time-nuts] Re: NTP server source needed
Forrest Christian (List Account)
[time-nuts] Re: NTP server source needed
Paul Watts
[time-nuts] Re: NTP server source needed
Steven Sommars
[time-nuts] Re: NTP server source needed
Denny Page via time-nuts
[time-nuts] Re: NTP server source needed
shouldbe q931
[time-nuts] Re: NTP server source needed
djl
[time-nuts] Re: NTP server source needed
djl
[time-nuts] EFTF/IFCS 2022 - time-nuts meetup?
Attila Kinali
[time-nuts] Re: EFTF/IFCS 2022 - time-nuts meetup?
Bernd Neubig Privat
[time-nuts] Re: EFTF/IFCS 2022 - time-nuts meetup?
Bernd Neubig
[time-nuts] Symmetricom/Datum FTS-1050A Disciplined Frequency Standard (long time constant loops)
cdelect
[time-nuts] Symmetricom/Datum FTS-1050A Disciplined Frequency Standard
Joseph Gwinn
[time-nuts] Re: Symmetricom/Datum FTS-1050A Disciplined Frequency Standard
Tom Van Baak
[time-nuts] Re: Symmetricom/Datum FTS-1050A Disciplined Frequency Standard
ed breya
[time-nuts] Double-balanced RF mixer L-R symmetry
ed breya
[time-nuts] Noise down-converter project
ed breya
[time-nuts] Re: Noise down-converter project
Lester Veenstra via time-nuts
[time-nuts] Noise down-converter project
ed breya
[time-nuts] Noise down-converter project
ed breya
[time-nuts] Re: Noise down-converter project
Robert LaJeunesse
[time-nuts] Re: Noise down-converter project
ghf
[time-nuts] Re: Noise down-converter project
Lux, Jim
[time-nuts] Re: Noise down-converter project
ed breya via time-nuts
[time-nuts] Re: Noise down-converter project
ed breya via time-nuts
[time-nuts] Re: Noise down-converter project
ed breya via time-nuts
[time-nuts] Re: Noise down-converter project
ed breya via time-nuts
[time-nuts] Re: Noise down-converter project
ed breya via time-nuts
[time-nuts] Re: Noise down-converter project
Askild via time-nuts
[time-nuts] Re: Noise down-converter project
ed breya via time-nuts
[time-nuts] Re: Need help to DATUM Power Supply MPS (Type MFS Modular Frequency Systems)
ed breya via time-nuts
[time-nuts] Re: Should a double oven XO be thermally isolated or just draft protected?
ed breya via time-nuts
[time-nuts] Re: Should a double oven XO be thermally isolated or just draft protected?
Bob kb8tq via time-nuts
[time-nuts] Re: DIY Low offset Phase Noise Analyzer (Erik, Kaashoek)
ed breya via time-nuts
[time-nuts] Re: DIY Low offset Phase Noise Analyzer (Erik, Kaashoek)
Lux, Jim via time-nuts
[time-nuts] Re: DIY Low offset Phase Noise Analyzer (Erik, Kaashoek)
ed breya via time-nuts
[time-nuts] Re: DIY Low offset Phase Noise Analyzer (Erik, Kaashoek)
glenlist via time-nuts
[time-nuts] Re: DIY Low offset Phase Noise Analyzer (Erik, Kaashoek)
Gerhard Hoffmann via time-nuts
[time-nuts] Re: DIY Low offset Phase Noise Analyzer (Erik, Kaashoek)
Erik Kaashoek via time-nuts
[time-nuts] Re: Symmetricom/Datum FTS-1050A Disciplined Frequency Standard
Michael Garvey via time-nuts
[time-nuts] 100 MHz Low Phase Noise Mobile GPSDO/GNSSDO?
Carsten Andrich
[time-nuts] Re: 100 MHz Low Phase Noise Mobile GPSDO/GNSSDO?
Markus Kleinhenz via time-nuts
[time-nuts] Re: 100 MHz Low Phase Noise Mobile GPSDO/GNSSDO?
Lux, Jim
[time-nuts] Re: 100 MHz Low Phase Noise Mobile GPSDO/GNSSDO?
Carsten Andrich
[time-nuts] Re: 100 MHz Low Phase Noise Mobile GPSDO/GNSSDO?
Markus Kleinhenz via time-nuts
[time-nuts] Re: 100 MHz Low Phase Noise Mobile GPSDO/GNSSDO?
Carsten Andrich
[time-nuts] GPS antenna locations
N1BUG
[time-nuts] Re: GPS antenna locations
Bob kb8tq
[time-nuts] Re: GPS antenna locations
N1BUG
[time-nuts] Re: GPS antenna locations
Bob kb8tq
[time-nuts] Re: GPS antenna locations
N1BUG
[time-nuts] Re: Question about GPS 1PPS ADEV
Carsten Andrich
[time-nuts] Re: Question about GPS 1PPS ADEV
John Ackermann N8UR
[time-nuts] Re: Question about GPS 1PPS ADEV
Matthias Welwarsky
[time-nuts] Re: Question about GPS 1PPS ADEV
Bob kb8tq
[time-nuts] Re: Question about GPS 1PPS ADEV
John Ackermann N8UR
[time-nuts] Re: Question about GPS 1PPS ADEV
Markus Kleinhenz via time-nuts
[time-nuts] Re: Question about GPS 1PPS ADEV
John Miller via time-nuts
[time-nuts] Re: Question about GPS 1PPS ADEV
John Ackermann
[time-nuts] Re: Question about GPS 1PPS ADEV
Matthias Welwarsky
[time-nuts] Re: Question about GPS 1PPS ADEV
Bob kb8tq
[time-nuts] Re: General discussion of PID algorithms applied to GPSDO control loops (continued 1)
Skip Withrow
[time-nuts] Re: General discussion of PID algorithms applied to GPSDO control loops (continued 1)
Bob kb8tq
[time-nuts] General discussion of PID algorithms applied to GPSDO control loops (continued 1)
André Balsa
[time-nuts] Re: General discussion of PID algorithms applied to GPSDO control loops (continued 1)
Bob kb8tq
[time-nuts] Re: General discussion of PID algorithms applied to GPSDO control loops (continued 1)
André Balsa
[time-nuts] Re: General discussion of PID algorithms applied to GPSDO control loops (continued 1)
Bob kb8tq
[time-nuts] Re: General discussion of PID algorithms applied to GPSDO control loops (continued 1)
Poul-Henning Kamp
[time-nuts] Re: General discussion of PID algorithms applied to GPSDO control loops (continued 1)
André Balsa
[time-nuts] Re: General discussion of PID algorithms applied to GPSDO control loops (continued 1)
Pluess, Tobias via time-nuts
[time-nuts] Re: General discussion of PID algorithms applied to GPSDO control loops (continued 1)
André Balsa
[time-nuts] General discussion of PID algorithms applied to GPSDO control loops
André Balsa
[time-nuts] National Physical Laboratory (NPL) open day in the UK
Dr. David Kirkby
[time-nuts] Trimble Thunderbolt question
N1BUG
[time-nuts] Re: Trimble Thunderbolt question
Robert LaJeunesse
[time-nuts] Re: Trimble Thunderbolt question
N1BUG
[time-nuts] Re: Low Phase Noise 10 MHz bench signal source
Joseph Gwinn
[time-nuts] Disabled Thunderbolt
Neville Michie
[time-nuts] Re: Disabled Thunderbolt
Francesco Messineo
[time-nuts] Z3801A GPS Rx board substitute?
Dan Rae via time-nuts
[time-nuts] Re: Z3801A GPS Rx board substitute?
Andrew Kalman
[time-nuts] Re: Z3801A GPS Rx board substitute?
Art Sepin
[time-nuts] Re: Z3801A GPS Rx board substitute?
Lon Cottingham
[time-nuts] Re: Z3801A GPS Rx board substitute?
Dan Rae via time-nuts
[time-nuts] Re: Z3801A GPS Rx board substitute?
Andrew Kalman
[time-nuts] Steering UK time station MSF
Steven Sommars
[time-nuts] Evaluating counter performance, seeking feedback.
Erik Kaashoek
[time-nuts] Re: Evaluating counter performance, seeking feedback.
Tom Van Baak
[time-nuts] Re: Evaluating counter performance, seeking feedback.
Erik Kaashoek
[time-nuts] Re: Evaluating counter performance, seeking feedback.
Erik Kaashoek
[time-nuts] Re: Evaluating counter performance, seeking feedback.
Erik Kaashoek
[time-nuts] Re: +1/f of transistors
Joseph Gwinn
[time-nuts] Re: +1/f of transistors
ghf
[time-nuts] HP5065A fs
timeok
[time-nuts] Re: +1/f of transistors
Joseph Gwinn
[time-nuts] Re: +1/f of transistors
use...@teply.info
[time-nuts] Re: +1/f of transistors
Richard (Rick) Karlquist
[time-nuts] Re: +1/f of transistors
Lux, Jim
[time-nuts] Re: +1/f of transistors
djl
[time-nuts] Re: +1/f of transistors
ASSI
[time-nuts] Re: +1/f of transistors
use...@teply.info
[time-nuts] Re: +1/f of transistors
Lux, Jim
[time-nuts] Re: +1/f of transistors
Alex Pummer
[time-nuts] Re: +1/f of transistors
ghf
[time-nuts] Re: +1/f of transistors
use...@teply.info
[time-nuts] Re: +1/f of transistors
ghf
[time-nuts] Re: +1/f of transistors
use...@teply.info
[time-nuts] Re: +1/f of transistors
use...@teply.info
[time-nuts] Re: +1/f of transistors
ASSI
[time-nuts] Re: +1/f of transistors
use...@teply.info
[time-nuts] Re: +1/f of transistors
Leon Pavlovic
[time-nuts] Re: +1/f of transistors
Bob kb8tq
[time-nuts] Re: +1/f of transistors
Lux, Jim
[time-nuts] Re: +1/f of transistors
use...@teply.info
[time-nuts] Re: +1/f of transistors
Joseph Gwinn
[time-nuts] Re: +1/f of transistors
Dan Kemppainen
[time-nuts] Re: +1/f of transistors
ed breya
[time-nuts] Re: +1/f of transistors
Lux, Jim
[time-nuts] Re: +1/f of transistors
ed breya
[time-nuts] Re: +1/f of transistors
Lux, Jim
[time-nuts] Re: +1/f of transistors
ed breya
[time-nuts] Re: +1/f of transistors
use...@teply.info
[time-nuts] Re: +1/f of transistors
Mike Monett
[time-nuts] Re: +1/f of transistors
Richard (Rick) Karlquist
[time-nuts] Ublox LEA-4T mentioned here. Have fired one up
paul swed
[time-nuts] Re: Ublox LEA-4T mentioned here. Have fired one up
John Miller via time-nuts
[time-nuts] Re: Ublox LEA-4T mentioned here. Have fired one up
paul swed
[time-nuts] Re: Ublox LEA-4T mentioned here. Have fired one up
paul swed
[time-nuts] Re: Ublox LEA-4T mentioned here. Have fired one up
John Miller via time-nuts
[time-nuts] Re: Ublox LEA-4T mentioned here. Have fired one up
paul swed
[time-nuts] Re: Ublox LEA-4T mentioned here. Have fired one up
paul swed
[time-nuts] GPScon peogram
Lon Cottingham
[time-nuts] Re: GPScon peogram
David Taylor via time-nuts
[time-nuts] Re: GPScon peogram
Bob kb8tq
[time-nuts] Re: GPScon peogram
Krishna Makhija
[time-nuts] "software TCXO" on commodity computers
Jeremy Elson
[time-nuts] Re: "software TCXO" on commodity computers
Greg Maxwell
[time-nuts] Re: "software TCXO" on commodity computers
Georg Sauthoff
[time-nuts] Re: "software TCXO" on commodity computers
Bernd Neubig
[time-nuts] Commercial solution - 122.88 Mhz low noise source
Jeff Blaine
[time-nuts] Re: Commercial solution - 122.88 Mhz low noise source
Bob kb8tq
[time-nuts] Re: Commercial solution - 122.88 Mhz low noise source
Lux, Jim
[time-nuts] Re: Commercial solution - 122.88 Mhz low noise source
Jeff Blaine
[time-nuts] Re: Commercial solution - 122.88 Mhz low noise source
glen english LIST
[time-nuts] Re: Commercial solution - 122.88 Mhz low noise source
Bob kb8tq
[time-nuts] Re: Commercial solution - 122.88 Mhz low noise source
Jeff Blaine
[time-nuts] Re: Commercial solution - 122.88 Mhz low noise source
Bob kb8tq
[time-nuts] Re: Commercial solution - 122.88 Mhz low noise source
Philip Gladstone
[time-nuts] Re: Commercial solution - 122.88 Mhz low noise source
Jeff Blaine
[time-nuts] Re: Commercial solution - 122.88 Mhz low noise source
glen english LIST
[time-nuts] TIC reference clock in 3-cornered hat
Marek Doršic
[time-nuts] Re: TIC reference clock in 3-cornered hat
Bob kb8tq
[time-nuts] Re: Low Phase Noise 10 MHz bench signal source sought
Joseph Gwinn
[time-nuts] Re: Low Phase Noise 10 MHz bench signal source sought
Lux, Jim
[time-nuts] Re: Low Phase Noise 10 MHz bench signal source sought
Bernd Neubig
[time-nuts] Low Phase Noise 10 MHz bench signal source sought
ew via time-nuts
[time-nuts] Re: Low Phase Noise 10 MHz bench signal source sought
Bob kb8tq
[time-nuts] Re: Low Phase Noise 10 MHz bench signal source sought
Mike Monett
[time-nuts] Re: Low Phase Noise 10 MHz bench signal source sought
ghf
Earlier messages
Later messages