Lady Heather should do the job. It supports using a GPS device as the main input device and a TICC/counter as an auxiliary input device (/ei= command line option). Writing a .xml format log file will have all the data. On a TICC you should connect chA to the 1PPS signal (and optionally the divided down 10 MHz to chB.
The next version of Lady Heather has a way to write a file with sawtooth corrected counter measurements. Note that there are 12 ways to sawtooth correct the PPS measurement. Only one way will work for a given combination of GPS/counter: add/subtract receiver sawtooth value apply the sawtooth correction to the previous/current/next counter reading apply the correction to the PPS reading or the PPS phase _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.