Hi Wilko and Bryan.

I was the one who asked and I'm also interested in getting more information, both on your project and using GPSD as suggested earlier.

Thank you,

Claude



Le 02/03/2022 14:06, Bryan _ a écrit :
CAUTION: This email originated from outside your organization.
Exercise caution when opening attachments or on clicking links from
unknown senders.


Hi Wilko:



I was not the OP, but I would be interested in the details of your project.



Cheers





-=Bryan=-

________________________________

From: Wilko Bulte <w...@xs4all.nl>

Sent: March 2, 2022 10:41 AM

To: Discussion of precise time and frequency measurement
<time-nuts@lists.febo.com>

Subject: [time-nuts] Re: GPSDO - GPS1300-10-1000 by RFX Ltd. UK



hello Bryan,



Runnimg LH on a *Pi is feasible without any problems. I have built
such a setup myself, it lives in my shack and is based on a Samsung
UCCM GPSDO (telco surplus obtained in China). The Pi in question is an
OrangePi Zero running Armbian Linux. It runs an Xdesktop on top of a
VNCserver.  Obviously LH shows herself on that desktop ;-) This whole
shebang allows running the GPSDO/OrangePi combo to run headless (i.e.
without a display), one can use any VNCclient to check on LH via the
network. Laptop, tablet, even a smartphone can be used to monitor the
GPSDO. The OrangePi has both Wlan as well as wired Ethernet options.



Hope this makes sense, I did an article for Electron, the monthly of
the Dutch VERON ham organisation. In Dutch, for obvious reasons. But
can make it available if there is interest.



Wilko

PA1WBU



On 2 Mar 2022, at 19:21, Bryan _ <bpl...@outlook.com> wrote:



I have seen a project where ladyheather is run off a PI, suppose you could just configure LH to display what you need.



-=Bryan=-



________________________________

From: va2...@ebox.net <va2...@ebox.net>

Sent: March 2, 2022 9:34 AM

To: Discussion of precise time and frequency measurement <time-nuts@lists.febo.com>

Subject: [time-nuts] Re: GPSDO - GPS1300-10-1000 by RFX Ltd. UK



Hello to all members.



I want to add to my lab a Pi based display that would show a GNSS SV map

like the one attached to this message.



Any suggestions ?



Thank you !



Claude VA2 HDD





_______________________________________________

time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an email to time-nuts-le...@lists.febo.com

To unsubscribe, go to and follow the instructions there.

_______________________________________________

time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe
send an email to time-nuts-le...@lists.febo.com

To unsubscribe, go to and follow the instructions there.

_______________________________________________

time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe
send an email to time-nuts-le...@lists.febo.com

To unsubscribe, go to and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an 
email to time-nuts-le...@lists.febo.com
To unsubscribe, go to and follow the instructions there.

Reply via email to