Hmmm this feels a bit awkward but that was a pretty clear explanation of how things work and after testing i do end up with negative raw materials in raw , positive finished product in stock and the balance of both those things in production so this seems to work just fine. Thanks a lot that was most helpfull & i wouldn't have figured it out myself!
I'm having issues with how supplier order generation work , maybe you can shed some light on this issue too. I'm not even too sure how i should configure my products (make to order/stock , produce/Stock for wich of the raw or finished product etc) . Basically if we keep the simply example of the finished ring & base ring you could say i have , for example , 10 models of finished ring (1 2 3 etc) and only 1 base model (used up in any BoM for the finished models) . I don't want to stock Base models ahead of time but i MAY have stock (remains from previous order) so i want the stock to be accounted for. I have a minum amount to order of say 20 units , if i do 2 production run for 2 finished rings lots of 5 each i end up with a need of 10 . I want tiny to create an order for 20 for my supplier (since that's the min) but when calculating needs he says i need 20X2 (wich untill there seems normal) , however it seems tiny doesn't keep track of the original need since when i merge both orders it asks for 40! instead of the 20 (that more than fill my need of 10) . Do you have any suggestions on how i should configure this so only 20 get ordered? I don't need orders to be created imediately either (i'm usually going to have lots of tiny production orders that will wait for a big one to get started). Any help is most appreciated and thanks again for the clarifications! _______________________________________________ Tinyerp-users mailing list http://tiny.be/mailman/listinfo/tinyerp-users
