Hi Ankur, The default baud rate is 57600 in Boomerang.
You should use GenericComm or SPC to send messages, and then address messages to the UART if you would like them to go to the PC. UART and Radio messages in Boomerang can be sent in parallel, because SPC implements a pool that processes messages concurrently. -Joe On 3/1/07, Ankur Kamthe <[EMAIL PROTECTED]> wrote:
Hi, I am trying to write an application wherein the Tmote receives data over the radio and forwards it to the PC via the UART. I was not getting the data to flow correctly into the PC, so I was concerned about the following things: 1. Is 57600 the default baud rate on the Tmote? 2. Do I need to use Resource Arbitration to send data to the PC and do radio communication for the Tmote? I am wiring my send, receive interfaces to UARTNoCRCPacket which wires to HPLUSART1M at the lower levels. HPLUSART1M gives the implementation of USART0 lowlevel functionality. I thought that Resource Arbitration was required only for communication between the radio and UART0. Could anyone correct me if I am making a wrong conclusion? Thanks, ankur _______________________________________________ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help