Thanks for your advices but I didn't manage to solve the problem.
I tried mica2 instead of 57900 but I have the same thing:
[EMAIL PROTECTED]:57600: resynchronising and no packets.
/dev/ttyS0 doesn't work:JavaIOException: invalid port
The ListenRaw programm doens't work too: I obtain:
openong port COM1
baud rate:57600
data bits: 8
stop bits: 1
parity: 0 and no value
and I have the version Tinyos-1.1.11-3is
and the led toggles still.
Do you have another suggestion?
Michael Schippling <[EMAIL PROTECTED]> a écrit :
Try using mica2 instead of 57600 in the -comm argument.
I know, I know, it should be micaz, but that's not the way things work...
Oh yeah, and if you are using later cygwin versions try /dev/ttyS0 instead
of COM1 too...
If that doesn't work, try the ListenRaw program to see if you are getting
any communciation at all.
Also...is this TOS2? If so, I think the Oscope program defaults to
being over the radio instead of direct to serial.
MS
CASTEL Myriam wrote:
Hi,
I'm trying tu run the oscilloscope application in micaz motes buy
following the instruction of the tutorial Lesson 6:
I typed: make micaz install mib510,/dev/ttyS0 and after: java
net.tinyos.sf.SerialForwarder -comm [EMAIL PROTECTED]:57600
but nothing appears on the Serial Forwarder screen:the number of
packets reads stays to 0, and the oscilloscope didn't display
values. However, the yellow led toggles.
I did the same with tossim buy replacing [EMAIL PROTECTED]:57600 with
tossim-serial and the oscilloscope works.
What can I do?
Thanks
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
