I'm sorry, I issued the wrong command since I use a mib510. Now, writing
uisp -dprog=mib510 -dpart=ATmega128 -dserial=/dev/ttyS1 --rd_fuses I get fuse low byte 0xff fuse high byte 0xd9 fuse extended byte 0xff calibration byte 0x00 - read only lock bits 0xff BLB12 -> 1 BLB11 -> 1 BLB02 -> 1 BLB01 -> 1 LB2 -> 1 LB1 -> 1 the fuse low byte is 0xFF. Do you know if the frequency is 8 Mhz or 7.3 Mhz?
From the datasheet is not clear, but I need precise time information.
thank you in advance Roberto
_______________________________________________ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
