2008/4/28 Bulut ERSAVAS <[EMAIL PROTECTED]>:
> Also, when CTP is used, ETX values are quite large. Even for a single hop,
> it is about 265. You will notice ETX values as large as 700 with 3-hop
> routes. However, with no LPL it was usually less than 300 even for 6-hop
> routes. Can this be due to beacons/acks getting lost with LPL?

The numbers are ETX*10 but they are still too big. For comparison,
lets look at my logs:
00 ff ff 00 08 25 00 18 0a 0c 80 ff ff 00 00 00 0f 2d 00 16 16 00 02
13 00 09 30 00 1e 00 00 10 00 00 03 16 00 17 00 00 0a 19 00 1d 19
00 ff ff 00 10 25 00 18 0a 07 80 ff ff 00 00 00 1e 30 00 1d 00 00 0f
30 00 08 19 00 17 00 00 0a 19 00 18 19 00 11 19 00 1f 00 00 09 00
00 ff ff 00 09 25 00 18 0a 08 80 ff ff 00 00 00 08 44 00 02 00 00 10
16 00 03 30 00 0f 30 00 17 00 00 0a 19 00 18 19 00 11 00 00 16 00
00 ff ff 00 10 25 00 18 0a 16 00 00 71 00 13 00 1e 39 00 0b 30 00 0f
54 00 08 26 00 13 00 00 0a 25 00 18 13 00 11 75 00 1f 00 00 71 19
00 ff ff 00 06 25 00 18 0a 0a 00 00 71 00 16 00 05 2d 00 1e 16 00 04
16 00 71 30 00 1d 00 00 0b 13 00 0c 44 00 03 44 00 0f 00 00 09 2b
00 ff ff 00 09 25 00 18 0a 17 00 00 71 00 16 00 08 6b 00 71 30 00 10
0f 00 03 4a 00 0f 22 00 17 00 00 0a 24 00 18 13 00 0d 00 00 06 00
00 ff ff 00 10 25 00 18 0a 17 00 00 71 00 13 00 1e 33 00 0b 30 00 0f
54 00 08 26 00 13 00 00 0a 25 00 18 13 00 11 75 00 1d 00 00 71 19
00 ff ff 00 09 25 00 18 0a 18 00 00 71 00 17 00 08 79 00 71 44 00 10
0d 00 03 4a 00 0f 22 00 17 00 00 0a 24 00 18 13 00 0d 00 00 06 00

You notice that I am getting 0 ETX10 when the nodes do not have
parents but when they do, ETX10 is not as large as yours. Because your
network is sparse with perhaps fewer and worse best links, I would
expect ETX10 to be larger but not as large as you are reporting.

You can send the debug logs through the radio by wiring
UARTDebugSenderP's UARTSend to an AMSender.

- om_p
_______________________________________________
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

Reply via email to