Add those defines to the Makefile, if you want to know where are defined by default use something like grep/find.
--Antonio On Wed, Mar 20, 2013 at 2:23 PM, Jhon James <softtro...@gmail.com> wrote: > Hello Antonio, > > > // UDP shell on port 2000// components UDPShellC; > // prints the routing table// components RouteCmdC; > > > > It is not mentioned in which file you need to comment these files. > PppRouterC.nc is the file in which I found these links to comment > > http://zolertia.sourceforge.net/wiki/index.php/Blip_v2.0 > > You can update that link. Also I want to ask that those defines > > #define MAX_PARENT 1 > #define ROUTE_TABLE_SZ 3 > > where we have to define them?? I mean in the same PppRouter.nc file? > Moreover > > his is test code not committed to trunk (not will ever be), when we manage > to get a final solution that makes us feel comfortable and gets accepted by > the core we will bring these changes to main trunk, at the moment all the > testing can be found r*eferenced here*, and soon at My GitHub in a test > branch > > by 'referenced here' you mean this page ( > http://zolertia.sourceforge.net/wiki/index.php/Blip_v2.0) or some other?? > > > > > On Wed, Mar 20, 2013 at 11:15 AM, Jhon James <softtro...@gmail.com> wrote: > > Hello Antonio, > > > > Thanks for the pointer. I just scrolled the page down. and read > > further. I thought that page was quite an old one. That is why I asked > > whether that implementation is included in the latest release or not. > > I will change the code and will get back to you if I will need any > > further help. > > > > Thanks once again. > > > > Regard's > > > > On Wed, Mar 20, 2013 at 11:00 AM, Antonio Linan <ali...@zolertia.com> > wrote: > >> Examples are self explanatory: > >> > >> make z1 blip install,2 bsl,/dev/ttyUSB1 > >> > >> > >> Replace ttyUSB1 for whatever port the mote is assigned. > >> > >> --Antonio > >> > >> > >> On Wed, Mar 20, 2013 at 11:58 AM, Antonio Linan <ali...@zolertia.com> > wrote: > >>> > >>> Read the wiki, again but carefully, it shows the files you need to > change > >>> for the applications to compile, and the code examples already points > out > >>> how to set the node id on compilation (install,X where X is the > desired ID). > >>> > >>> --Antonio > >>> > >>> > >>> On Wed, Mar 20, 2013 at 11:54 AM, Jhon James <softtro...@gmail.com> > wrote: > >>>> > >>>> Hello Help Desk, Antonio and Eric, > >>>> > >>>> I was trying to install 6LowPAN Blip implementation on Z1 motes using > >>>> the following link > >>>> > >>>> http://zolertia.sourceforge.net/wiki/index.php/Blip_v2.0 > >>>> > >>>> > >>>> I have the latest release of the TinyOs and the problem that I am > >>>> currently having is that when I try to install the Ppp_Router example > >>>> I get the following error > >>>> > >>>> make z1 blip install,1 > >>>> > >>>> /root/top/t2_cur/tinyos-release/tos/lib/ppp/LcpAutomatonP.nc: In > >>>> function ‘LcpAutomatonP__0__processEventActions_’: > >>>> /root/top/t2_cur/tinyos-release/tos/lib/ppp/LcpAutomatonP.nc:543:93: > >>>> warning: variable ‘in_actions’ set but not used > >>>> [-Wunused-but-set-variable] > >>>> /usr/bin/../lib/gcc/msp430/4.6.3/../../../../msp430/bin/ld: > >>>> build/z1/main.exe section `.bss' will not fit in region `ram' > >>>> /usr/bin/../lib/gcc/msp430/4.6.3/../../../../msp430/bin/ld: region > >>>> `ram' overflowed by 1534 bytes > >>>> collect2: ld returned 1 exit status > >>>> make: *** [exe0] Error 1 > >>>> > >>>> > >>>> Now I believe that the latest tinyos-release does not contain the > >>>> compressed implementation of the blip for z1 motes. Is that right??? > >>>> > >>>> > >>>> Also how we know from here that the node id is 1?? I mean I did not > >>>> burn the node id. The motes are new motes that I recieved almost a > >>>> month ago. I only burnt the LED blink code just to blink the LED's and > >>>> they work perfectly okay. > >>>> > >>>> > >>>> > >>>> Also I want to ask that when I do > >>>> > >>>> make z1 install > >>>> > >>>> it installs the firmware in ttyUSB0 device and i believe that MOTECOM > >>>> variable tell which one to program. Now I have a 3 nodes one is > >>>> ttyUSB0, other is ttyUSB1 and the third is ttyUSB2. What argument to > >>>> pass in order to access the particular node?? > >>>> > >>>> > >>>> Regard's > >>> > >>> > >>> > >>> > >>> -- > >>> -- > >>> Antonio Liñan Colina > >>> R+D+I Engineer > >>> @: ali...@advancare.com > >>> @: ali...@zolertia.com > >>> ------------------------------ > >>> Advancare > >>> T: +34 93 582 02 70 > >>> http://www.advancare.com > >>> http://www.zolertia.com > >>> http://zolertia.sourceforge.net > >>> http://webshop.zolertia.com > >> > >> > >> > >> > >> -- > >> -- > >> Antonio Liñan Colina > >> R+D+I Engineer > >> @: ali...@advancare.com > >> @: ali...@zolertia.com > >> ------------------------------ > >> Advancare > >> T: +34 93 582 02 70 > >> http://www.advancare.com > >> http://www.zolertia.com > >> http://zolertia.sourceforge.net > >> http://webshop.zolertia.com > > -- -- Antonio Liñan Colina R+D+I Engineer @: ali...@advancare.com @: ali...@zolertia.com ------------------------------ Advancare T: +34 93 582 02 70 http://www.advancare.com http://www.zolertia.com http://zolertia.sourceforge.net http://webshop.zolertia.com
_______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
