defined them in makefile and commented the lines as instructed here is the error
/usr/bin/../lib/gcc/msp430/4.6.3/../../../../msp430/bin/ld: build/z1/main.exe section `.bss' will not fit in region `ram' /usr/bin/../lib/gcc/msp430/4.6.3/../../../../msp430/bin/ld: region `ram' overflowed by 1218 bytes collect2: ld returned 1 exit status make: *** [exe0] Error 1 Regard's On Wed, Mar 20, 2013 at 1:29 PM, Antonio Linan <ali...@zolertia.com> wrote: > Add those defines to the Makefile, if you want to know where are defined > by default use something like grep/find. > > --Antonio > > > On Wed, Mar 20, 2013 at 2:23 PM, Jhon James <softtro...@gmail.com> wrote: > >> Hello Antonio, >> >> >> // UDP shell on port 2000// components UDPShellC; >> // prints the routing table// components RouteCmdC; >> >> >> >> It is not mentioned in which file you need to comment these files. >> PppRouterC.nc is the file in which I found these links to comment >> >> http://zolertia.sourceforge.net/wiki/index.php/Blip_v2.0 >> >> You can update that link. Also I want to ask that those defines >> >> #define MAX_PARENT 1 >> #define ROUTE_TABLE_SZ 3 >> >> where we have to define them?? I mean in the same PppRouter.nc file? >> Moreover >> >> his is test code not committed to trunk (not will ever be), when we >> manage to get a final solution that makes us feel comfortable and gets >> accepted by the core we will bring these changes to main trunk, at the >> moment all the testing can be found r*eferenced here*, and soon at My >> GitHub in a test branch >> >> by 'referenced here' you mean this page ( >> http://zolertia.sourceforge.net/wiki/index.php/Blip_v2.0) or some >> other?? >> >> >> >> On Wed, Mar 20, 2013 at 11:15 AM, Jhon James <softtro...@gmail.com> >> wrote: >> > Hello Antonio, >> > >> > Thanks for the pointer. I just scrolled the page down. and read >> > further. I thought that page was quite an old one. That is why I asked >> > whether that implementation is included in the latest release or not. >> > I will change the code and will get back to you if I will need any >> > further help. >> > >> > Thanks once again. >> > >> > Regard's >> > >> > On Wed, Mar 20, 2013 at 11:00 AM, Antonio Linan <ali...@zolertia.com> >> wrote: >> >> Examples are self explanatory: >> >> >> >> make z1 blip install,2 bsl,/dev/ttyUSB1 >> >> >> >> >> >> Replace ttyUSB1 for whatever port the mote is assigned. >> >> >> >> --Antonio >> >> >> >> >> >> On Wed, Mar 20, 2013 at 11:58 AM, Antonio Linan <ali...@zolertia.com> >> wrote: >> >>> >> >>> Read the wiki, again but carefully, it shows the files you need to >> change >> >>> for the applications to compile, and the code examples already points >> out >> >>> how to set the node id on compilation (install,X where X is the >> desired ID). >> >>> >> >>> --Antonio >> >>> >> >>> >> >>> On Wed, Mar 20, 2013 at 11:54 AM, Jhon James <softtro...@gmail.com> >> wrote: >> >>>> >> >>>> Hello Help Desk, Antonio and Eric, >> >>>> >> >>>> I was trying to install 6LowPAN Blip implementation on Z1 motes using >> >>>> the following link >> >>>> >> >>>> http://zolertia.sourceforge.net/wiki/index.php/Blip_v2.0 >> >>>> >> >>>> >> >>>> I have the latest release of the TinyOs and the problem that I am >> >>>> currently having is that when I try to install the Ppp_Router example >> >>>> I get the following error >> >>>> >> >>>> make z1 blip install,1 >> >>>> >> >>>> /root/top/t2_cur/tinyos-release/tos/lib/ppp/LcpAutomatonP.nc: In >> >>>> function ‘LcpAutomatonP__0__processEventActions_’: >> >>>> /root/top/t2_cur/tinyos-release/tos/lib/ppp/LcpAutomatonP.nc:543:93: >> >>>> warning: variable ‘in_actions’ set but not used >> >>>> [-Wunused-but-set-variable] >> >>>> /usr/bin/../lib/gcc/msp430/4.6.3/../../../../msp430/bin/ld: >> >>>> build/z1/main.exe section `.bss' will not fit in region `ram' >> >>>> /usr/bin/../lib/gcc/msp430/4.6.3/../../../../msp430/bin/ld: region >> >>>> `ram' overflowed by 1534 bytes >> >>>> collect2: ld returned 1 exit status >> >>>> make: *** [exe0] Error 1 >> >>>> >> >>>> >> >>>> Now I believe that the latest tinyos-release does not contain the >> >>>> compressed implementation of the blip for z1 motes. Is that right??? >> >>>> >> >>>> >> >>>> Also how we know from here that the node id is 1?? I mean I did not >> >>>> burn the node id. The motes are new motes that I recieved almost a >> >>>> month ago. I only burnt the LED blink code just to blink the LED's >> and >> >>>> they work perfectly okay. >> >>>> >> >>>> >> >>>> >> >>>> Also I want to ask that when I do >> >>>> >> >>>> make z1 install >> >>>> >> >>>> it installs the firmware in ttyUSB0 device and i believe that MOTECOM >> >>>> variable tell which one to program. Now I have a 3 nodes one is >> >>>> ttyUSB0, other is ttyUSB1 and the third is ttyUSB2. What argument to >> >>>> pass in order to access the particular node?? >> >>>> >> >>>> >> >>>> Regard's >> >>> >> >>> >> >>> >> >>> >> >>> -- >> >>> -- >> >>> Antonio Liñan Colina >> >>> R+D+I Engineer >> >>> @: ali...@advancare.com >> >>> @: ali...@zolertia.com >> >>> ------------------------------ >> >>> Advancare >> >>> T: +34 93 582 02 70 >> >>> http://www.advancare.com >> >>> http://www.zolertia.com >> >>> http://zolertia.sourceforge.net >> >>> http://webshop.zolertia.com >> >> >> >> >> >> >> >> >> >> -- >> >> -- >> >> Antonio Liñan Colina >> >> R+D+I Engineer >> >> @: ali...@advancare.com >> >> @: ali...@zolertia.com >> >> ------------------------------ >> >> Advancare >> >> T: +34 93 582 02 70 >> >> http://www.advancare.com >> >> http://www.zolertia.com >> >> http://zolertia.sourceforge.net >> >> http://webshop.zolertia.com >> >> > > > -- > -- > Antonio Liñan Colina > R+D+I Engineer > @: ali...@advancare.com > @: ali...@zolertia.com > ------------------------------ > Advancare > T: +34 93 582 02 70 > http://www.advancare.com > http://www.zolertia.com > http://zolertia.sourceforge.net > http://webshop.zolertia.com >
_______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help