I think there is a setting to slow down or speed up the "button pushes" it sends, in other words it waits say 1/2 second between 1-2-7 and the box may not respond quickly enough, and it misses the middle one.
Glen ----- Original Message ----- From: "Milone, Douglas P." <[email protected]> To: <[email protected]> Sent: Thursday, March 26, 2009 9:01 AM Subject: RE: [TiVo Central] changing channels > Not an issue that I have but I think what is happening is that the 2 is > being missed by your TiVo then as with any recording (not sure why though) > when it's over the TiVo changes the channel back to the channel that its > recording so when it first tried to change to 127 it changed it to 17 then > at the end of the show it sent another signal to change the channel to 127 > but got it right that time... > > You can check a couple things here if you are using a blaster for > the IR signal make sure that its positioned good and if there might be > interference from another device. Lastly if your TiVo is one where it is > control another device like a cable or satellite box you can test the > codes to see if you have picked the best remote code for that device. > > > > From: [email protected] [mailto:[email protected]] On > Behalf Of skcamron > Sent: Monday, March 23, 2009 10:28 AM > To: [email protected] > Subject: [TiVo Central] changing channels > > > Does anyone else have this issue? For example, Tivo thinks it is on > channel 127 but it is actually on channel 17. Then when it has finished > recording on the wrong channel, it changes to the correct channel. I have > tried so many settings on channel changing and it always passes the tests > but in the real world it still messes up. > > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Yahoo! Groups Links > > >
