Thanks, Scott! It does read much better. Belén
On 23/10/2014 16:40, "Rifenbark, Scott M" <[email protected]> wrote: >Here is some feedback on the text: > >>-----Original Message----- >>From: Barros Pena, Belen >>Sent: Thursday, October 23, 2014 6:04 AM >>To: [email protected] >>Cc: Michael Halstead; [email protected]; Rifenbark, Scott M; Paul >>Eggleton >>Subject: Changes to the Toaster set up process >> >>I ran the Toaster set up process by a couple of people, and taking their >>feedback into account, I made some changes to the text we show during the >>configuration process. All changes are spelled out in detail in a very >>long >>comment in Bugzilla >> >>https://bugzilla.yoctoproject.org/show_bug.cgi?id=6785#c2 >> >>In a nutshell, a successful Toaster set up will look like this after the >>db user is >>set up: >> >>Verifying the Build Environment > >Verifying the Build Environment... > >> >>The Build Environment is not configured: you will be asked to configure >>it now > >The Build Environment is not configured. You will be asked to configure >it now. > >> >>Step 1 of 3: Toaster needs to know in which directory it should check >>out the >>layers that will be needed for your builds. Toaster suggests " >>/home/yocto". If you select this directory, a layer like "meta-yocto" >>will end >>up in "/home/yocto/meta-yocto". Press enter to select " /home/yocto" >>or type the full path to a different directory: >> >>Check out directory saved > >Checkout directory has been saved. > >> >>Step 2 of 3: Toaster needs to know where is your build directory. The >>build >>directory is where all the artifacts created by your builds will be >>stored. >>Toaster suggests " /home/yocto/poky/build". Press enter to select " >>/home/yocto/poky/build" or type the full path to a different directory: > >Step 2 of 3: Toaster needs to know the location of your build directory. > The build directory is where all the artifacts created by your builds >will be stored. Toaster suggests "/home/yocto/poky/build". Press Enter >to select "/home/yocto/poky/build" or provide the full path to a >different directory: > >> >>Build directory saved >> >>Step 3 of 3: Toaster comes with a default configuration that includes >>support >>for the master branch and 1.7 release of the Yocto Project, and the >>OpenEmbedded layer source, i.e. the collection of layers created by the >>OpenEmbedded community. Would you like to use this default configuration? >>(Y/n): > >Step 3 of 3: Toaster comes with a default configuration that includes >support for the master branch, the 1.7 release of the Yocto Project, and >the OpenEmbedded layer source (i.e. the collection of layers created by >the OpenEmbedded community). Would you like to use this default >configuration? (Y/n): > >> >>Updating the information for the OpenEmbedded layer source. Please wait. > >Updating the information for the OpenEmbedded layer source. Please >wait... > >> >>OpenEmbedded layer source information updated. >> >>Verifying the Build Environment. > >Verifying the Build Environment... > >> >> >>Starting webserver > >Starting the webserver... > >> >>Running. Stop with Ctrl+C > >Toaster is now running. You can stop it with Ctrl+C. > >> >>Opening http://0.0.0.0:8000 >> >>Feedback on the above text would be much appreciated. >> >>Thanks! >> >>Belén >> > -- _______________________________________________ toaster mailing list [email protected] https://lists.yoctoproject.org/listinfo/toaster
