Hi everyone
I hope someone can help me
After having a look to your url. I've to say that I think I'm closer to a
solution, but I haven't arrived yet.
I haven't achieved yet to make apache and tomcat work together.
I followed the steps to setup apache nonssl, tomcat and mod_jk because I had
java already installed and I work with mysql and I think I don't need any of
the other packages that you mention in the url.
After following your instructions I found two steps a bit estrange that I
don't understand:
1)
Directly below this line in "/usr/local/tomcat/WEB-INF/server.xml"
<Host name="localhost" debug="0" appBase="webapps">
Add this line
<Listener className="org.apache.ajp.tomcat4.config.ApacheConfig"
append="true" forwardAll="false"
modJk="/usr/local/apache2/modules/mod_jk.so" />
Do you mean that I need to create a folder called WEB-INF and introduce a
copy of server.xml?
2) In the same paragraph you have this:
Create file "/usr/local/tomcat/workers.properties" with these contents:
# Setting Tomcat & Java Home
workers.tomcat_home=/usr/local/tomcat
workers.java_home=/usr/local/java/java
ps=/
worker.list=ajp13
worker.ajp13.port=8009
worker.ajp13..host=localhost:443
worker.ajp13.type=ajp13
But the default location for the workers file (or the location that
"everybody " uses) is /usr/local/tomcat/conf/jk/workers.properties. Do you
mean that I need to create another workers .properties?
Anyway is what I created the new file and I copied the same content in the
other workers but I'm not sure if the line worker.ajp13..host=localhost:443
should be worker.ajp13..host=localhost:80 because I'm not using SSL.
Attached you will find my httpd.conf, server.xml and workers.properties.
Thank you for your help.
Joaquin
Talego
> ----- Original Message -----
> From: "Oscar Carrillo" <[EMAIL PROTECTED]>
> To: "Tomcat Users List" <[EMAIL PROTECTED]>
> Sent: Wednesday, October 29, 2003 4:15 PM
> Subject: Re: Help needed with Apache 2.0.47 Tomcat 4.1.27 + mod_jk
>
>
> > Does Apache launches and serves up plain html files?
> >
> > If so, most likely it's the mapping done in httpd.conf and/or the
> > auto-generated modjk.conf file.
> >
> > I have examples on how to do it in httpd.conf for virtual hosting here:
> > http://daydream.stanford.edu/tomcat/install_web_services.html
> >
> > It may help you in seeing what gets configured where.
> >
> > Oscar
> >
> >
> > On Wed, 29 Oct 2003, Joaquin Corchero wrote:
> >
> > > Hi!
> > >
> > > I'm new in tomcat and I have a problem (very big for me) so I hope
> someone will be able to help me.
> > >
> > > My problem is that after setting everything up following the
> > > instructions from
> > > http://www.johnturner.com/howto/apache2-tomcat4127-jk-rh9-howto.html,
> > > the apache server doesn't execute the jsp files.
> > >
> > > I didn't get any error during the installations, so I think everything
> > > is working properly.... I don't understand what's the problem.
> > >
> > >
> > > Thank you
> > >
> > > Joaquin
> > >
> > >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > For additional commands, e-mail: [EMAIL PROTECTED]
> >
> >
>
<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN" debug="0">
<!--Modiffied Joaquin 29 Oct-->
<Listener className="org.apache.ajp.tomcat4.config.ApacheConfig" modJk="/usr/local/apache/modules/mod_jk.so" WorkersConfig="/usr/local/tomcat/conf/jk/workers.properties"/>
<!-- Comment these entries out to disable JMX MBeans support -->
<!-- You may also configure custom components (e.g. Valves/Realms) by
including your own mbean-descriptor file(s), and setting the
"descriptors" attribute to point to a ';' seperated list of paths
(in the ClassLoader sense) of files to add to the default list.
e.g. descriptors="/com/myfirm/mypackage/mbean-descriptor.xml"
-->
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Tomcat-Standalone">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 4.0 documentation bundle for more detailed
instructions):
* Download and install JSSE 1.0.2 or later, and put the JAR files
into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL Coyote HTTP/1.1 Connector on port 8080 -->
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />
<!-- Note : To disable connection timeouts, set connectionTimeout value
to -1 -->
<!-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
<!--
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8443" minProcessors="5" maxProcessors="75"
enableLookups="true"
acceptCount="100" debug="0" scheme="https" secure="true"
useURIValidationHack="false" disableUploadTimeout="true">
<Factory className="org.apache.coyote.tomcat4.CoyoteServerSocketFactory"
clientAuth="false" protocol="TLS" />
</Connector>
-->
<!-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 Modified Joaquin 30 Oct was uncommented
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="0"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>-->
<!-- Define an AJP 1.3 Connector on port 8009 Modified Joaquin 30 Oct was commented-->
<Connector className="org.apache.ajp.tomcat4.Ajp13Connector"
port="8009" minProcessors="5" maxProcessors="75"
acceptCount="10" debug="0"/>
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8082" minProcessors="5" maxProcessors="75"
enableLookups="true"
acceptCount="100" debug="0" connectionTimeout="20000"
proxyPort="80" useURIValidationHack="false"
disableUploadTimeout="true" />
-->
<!-- Define a non-SSL legacy HTTP/1.1 Test Connector on port 8083 -->
<!--
<Connector className="org.apache.catalina.connector.http.HttpConnector"
port="8083" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" />
-->
<!-- Define a non-SSL HTTP/1.0 Test Connector on port 8084 -->
<!--
<Connector className="org.apache.catalina.connector.http10.HttpConnector"
port="8084" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via JK/JK2 ie :
<Engine name="Standalone" defaultHost="localhost" debug="0" jmvRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Standalone" defaultHost="localhost" debug="0">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.3
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Global logger unless overridden at lower levels -->
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
debug="0" resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host
Modified Joaquin 30 OctThe name was localhost, appBase="webapps"-->
<Host name="localhost" debug="0" appBase="webapps" unpackWARs="true" autoDeploy="true">
<Listener className="org.apache.ajp.tomcat4.config.ApacheConfig" append="true" forwardAll="false" modJk="/usr/local/apache/modules/mod_jk.so" />
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across *all* web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn"
debug="0"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Logger shared by all Contexts related to this virtual host. By
default (when using FileLogger), log files are created in the "logs"
directory relative to $CATALINA_HOME. If you wish, you can specify
a different directory with the "directory" attribute. Specify either a
relative (to $CATALINA_HOME) or absolute path to the desired
directory.-->
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>
<!-- Define properties for each web application. This is only needed
if you want to set non-default properties, or have web application
document roots in places other than the virtual host's appBase
directory. -->
<!-- Tomcat Root Context -->
<!--
<Context path="" docBase="ROOT" debug="0"/>
-->
<!-- Tomcat Examples Context -->
<Context path="/examples" docBase="examples" debug="0"
reloadable="true" crossContext="true">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_examples_log." suffix=".txt"
timestamp="true"/>
<Ejb name="ejb/EmplRecord" type="Entity"
home="com.wombat.empl.EmployeeRecordHome"
remote="com.wombat.empl.EmployeeRecord"/>
<!-- If you wanted the examples app to be able to edit the
user database, you would uncomment the following entry.
Of course, you would want to enable security on the
application as well, so this is not done by default!
The database object could be accessed like this:
Context initCtx = new InitialContext();
Context envCtx = (Context) initCtx.lookup("java:comp/env");
UserDatabase database =
(UserDatabase) envCtx.lookup("userDatabase");
-->
<!--
<ResourceLink name="userDatabase" global="UserDatabase"
type="org.apache.catalina.UserDatabase"/>
-->
<!-- PersistentManager: Uncomment the section below to test Persistent
Sessions.
saveOnRestart: If true, all active sessions will be saved
to the Store when Catalina is shutdown, regardless of
other settings. All Sessions found in the Store will be
loaded on startup. Sessions past their expiration are
ignored in both cases.
maxActiveSessions: If 0 or greater, having too many active
sessions will result in some being swapped out. minIdleSwap
limits this. -1 or 0 means unlimited sessions are allowed.
If it is not possible to swap sessions new sessions will
be rejected.
This avoids thrashing when the site is highly active.
minIdleSwap: Sessions must be idle for at least this long
(in seconds) before they will be swapped out due to
activity.
0 means sessions will almost always be swapped out after
use - this will be noticeably slow for your users.
maxIdleSwap: Sessions will be swapped out if idle for this
long (in seconds). If minIdleSwap is higher, then it will
override this. This isn't exact: it is checked periodically.
-1 means sessions won't be swapped out for this reason,
although they may be swapped out for maxActiveSessions.
If set to >= 0, guarantees that all sessions found in the
Store will be loaded on startup.
maxIdleBackup: Sessions will be backed up (saved to the Store,
but left in active memory) if idle for this long (in seconds),
and all sessions found in the Store will be loaded on startup.
If set to -1 sessions will not be backed up, 0 means they
should be backed up shortly after being used.
To clear sessions from the Store, set maxActiveSessions, maxIdleSwap,
and minIdleBackup all to -1, saveOnRestart to false, then restart
Catalina.
-->
<!--
<Manager className="org.apache.catalina.session.PersistentManager"
debug="0"
saveOnRestart="true"
maxActiveSessions="-1"
minIdleSwap="-1"
maxIdleSwap="-1"
maxIdleBackup="-1">
<Store className="org.apache.catalina.session.FileStore"/>
</Manager>
-->
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/EmployeeAppDb">
<parameter><name>username</name><value>sa</value></parameter>
<parameter><name>password</name><value></value></parameter>
<parameter><name>driverClassName</name>
<value>org.hsql.jdbcDriver</value></parameter>
<parameter><name>url</name>
<value>jdbc:HypersonicSQL:database</value></parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
<ResourceLink name="linkToGlobalResource"
global="simpleValue"
type="java.lang.Integer"/>
</Context>
</Host>
</Engine>
</Service>
</Server>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
