Sadly I have to tell you that a brilliant light that was Price has been dimmed. He is a silent key now. He will be missed.XYL Inge
From: David Harmon <k6...@sbcglobal.net> To: 'HP' <pfizenma...@q.com>; 'Mike Waters' <mikew...@gmail.com> Cc: 'topband' <topband@contesting.com> Sent: Thursday, October 5, 2017 11:07 PM Subject: Re: Topband: - Belden Snap n Seal Yep....me too. I got everything at Lowes.....tools and all. One small thing..... The correct part number is SNS1P6U-50R. The writing is small and Hank had a 5 in place of the second S. Also...the color of the connector indicates what coax is supposed to be used. Red is the correct color in this case. There is a chart on the Belden site indicating the color vs coax etc..... As I remember....the box of 50 was about $26 73 David Harmon K6XYZ Sperry, OK -----Original Message----- From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of HP Sent: Thursday, October 5, 2017 5:09 PM To: Mike Waters <mikew...@gmail.com> Cc: topband <topband@contesting.com> Subject: Re: Topband: - Belden Snap n Seal I bought a box of 50 Belden Snap N Seal - the box says RG-6/6QS which I assumed meant it was ok for both but have never used it on anything but regular RG6 - I have the Belden Tool which I bought at same time. - part number of the connector is SN51P6U-50R It was at LOWES and was much less than ordering from a ham supplier . I cant find my receipt but remember it beat u know who by a LOT. 73 Hank K7HP _________________ Topband Reflector Archives - http://www.contesting.com/_topband _________________ Topband Reflector Archives - http://www.contesting.com/_topband _________________ Topband Reflector Archives - http://www.contesting.com/_topband