> On 18 Apr 2024, at 3:41 PM, 'Luis Enrique Ramos García' via TopBraid Suite > Users <topbraid-users@googlegroups.com> wrote: > > Holger, > > I think I did the recommended change: > > tesontologyramosenum:TrafficLight > a owl:Class ; > a sh:NodeShape ; > rdfs:label "TrafficLight" ; > rdfs:subClassOf owl:Thing ; > sh:property tesontologyramosenum:TrafficLight-color ; > . > tesontologyramosenum:TrafficLight-color > a sh:PropertyShape ; > sh:path tesontologyramosenum:color ; > sh:class tesontologyramosenum:Color ; > sh:name "color" ; > sh:nodeKind sh:IRI ; > > > But, when I create a trafficlight1 instance, I still have the same view, the > color property is present, however it is blank, no colors:
New instances will not have a default value for it, but what happens when you switch to edit mode? Don't you see a drop down for colors when you add a new value/row? Holger > > <image.png> > So, I am still not able to find out where the problem is.. > > > Luis Ramos > > > El jue, 18 abr 2024 a las 8:22, Holger Knublauch (<hol...@topquadrant.com > <mailto:hol...@topquadrant.com>>) escribió: >> >> >>> On 18 Apr 2024, at 7:52 AM, 'Luis Enrique Ramos García' via TopBraid Suite >>> Users <topbraid-users@googlegroups.com >>> <mailto:topbraid-users@googlegroups.com>> wrote: >>> >>> Hi Holger, >>> >>> good morning, >>> >>> Unfortunately it is not the case, and I can not see the options in the >>> editor. >>> >>> The code of the traffic light class and color property are: >>> >>> tesontologyramosenum:TrafficLight >>> a owl:Class ; >>> a sh:NodeShape ; >>> rdfs:label "TrafficLight" ; >>> rdfs:subClassOf owl:Thing ; >>> sh:property tesontologyramosenum:TrafficLight-color ; >>> . >>> tesontologyramosenum:TrafficLight-color >>> a sh:PropertyShape ; >>> sh:path tesontologyramosenum:color ; >>> sh:name "color" ; >>> sh:node tesontologyramosenum:Color ; >>> sh:nodeKind sh:IRI ; >> >> Replace the sh:node with: >> >> sh:class tesontologyramosenum:Color ; >> >> as sh:node is not enough to tell the system which values can be selected. >> >> Holger >> >> >> >>> . >>> and when I create an instance of traffic light, this is what I see: >>> >>> <image.png> >>> Thus, I wonder what I am doing wrong?. >>> >>> >>> best regards >>> >>> >>> Luis Ramos >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> El mié, 17 abr 2024 a las 16:46, Holger Knublauch (<hol...@topquadrant.com >>> <mailto:hol...@topquadrant.com>>) escribió: >>>> >>>> >>>>> On 17 Apr 2024, at 3:55 PM, 'Luis Enrique Ramos García' via TopBraid >>>>> Suite Users <topbraid-users@googlegroups.com >>>>> <mailto:topbraid-users@googlegroups.com>> wrote: >>>>> >>>>> it works now in this ontology, >>>>> >>>>> now, if I want to add a color in any instance (for testing purpose), >>>>> it is only by modifying the code?, like this?: >>>> >>>> If you have properly declared the color property then you should be able >>>> to select values from the form, not just source code. >>>> >>>> Holger >>>> >>>> >>>>> >>>>> <image.png> >>>>> That is moreless the expected result on my end. >>>>> >>>>> >>>>> Thanks, >>>>> >>>>> >>>>> Luis >>>>> >>>>> El mié, 17 abr 2024 a las 15:37, Holger Knublauch >>>>> (<hol...@topquadrant.com <mailto:hol...@topquadrant.com>>) escribió: >>>>>> Yes that looks right. To use it in traffic lights, just declare a color >>>>>> property there which has sh:class :Color. >>>>>> >>>>>> Holger >>>>>> >>>>>> >>>>>>> On 17 Apr 2024, at 3:00 PM, 'Luis Enrique Ramos García' via TopBraid >>>>>>> Suite Users <topbraid-users@googlegroups.com >>>>>>> <mailto:topbraid-users@googlegroups.com>> wrote: >>>>>>> >>>>>>> sure, >>>>>>> >>>>>>> I created a similar ontology for testing with same results, here is the >>>>>>> code: >>>>>>> >>>>>>> tesontologyramosenum:Color >>>>>>> a owl:Class ; >>>>>>> a sh:NodeShape ; >>>>>>> rdfs:label "Color" ; >>>>>>> rdfs:subClassOf owl:Thing ; >>>>>>> sh:in ( >>>>>>> tesontologyramosenum:Green >>>>>>> tesontologyramosenum:Yellow >>>>>>> tesontologyramosenum:Red >>>>>>> ) ; >>>>>>> sh:property tesontologyramosenum:Color-label ; >>>>>>> . >>>>>>> >>>>>>> the screen shot is this: >>>>>>> >>>>>>> <image.png> >>>>>>> <image.png> >>>>>>> >>>>>>> with similar results, a datatype property without labeling, and a group >>>>>>> of undeclared properties. >>>>>>> >>>>>>> Is this the expected result? >>>>>>> >>>>>>> How do I use this in traffic light instances, if that were the case? >>>>>>> >>>>>>> >>>>>>> Luis >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> El mié, 17 abr 2024 a las 14:41, Holger Knublauch >>>>>>> (<hol...@topquadrant.com <mailto:hol...@topquadrant.com>>) escribió: >>>>>>>> Can you paste us the complete content of the source code panel, e.g. >>>>>>>> as a screenshot? It's hard to see otherwise and there are syntax >>>>>>>> errors below. >>>>>>>> >>>>>>>> Holger >>>>>>>> >>>>>>>> >>>>>>>>> On 17 Apr 2024, at 2:38 PM, 'Luis Enrique Ramos García' via TopBraid >>>>>>>>> Suite Users <topbraid-users@googlegroups.com >>>>>>>>> <mailto:topbraid-users@googlegroups.com>> wrote: >>>>>>>>> >>>>>>>>> I need only 3 elements in the enum, >>>>>>>>> >>>>>>>>> But, I tried at the first the source code edition, and told you the >>>>>>>>> result I got: >>>>>>>>> >>>>>>>>> ********************************************************************************************************** >>>>>>>>> >>>>>>>>> 1. I tried to add the code by myself, but it seems there is something >>>>>>>>> wrong with the code: >>>>>>>>> sh:in ( >>>>>>>>> myontology:value1 >>>>>>>>> myontology _:value2 >>>>>>>>> myontology :value3 >>>>>>>>> ) ; >>>>>>>>> myontology:property1; >>>>>>>>> myontology:property2; >>>>>>>>> myontology:enumproperty; >>>>>>>>> >>>>>>>>> Please, take in account that I edited the enum property just after >>>>>>>>> the sh:in, but the editor put it at the end >>>>>>>>> of the list of properties. >>>>>>>>> >>>>>>>>> Part of the result was this black datatype property in properties list >>>>>>>>> >>>>>>>>> <image.png> >>>>>>>>> >>>>>>>>> and in the undeclared property there is a list with these values: >>>>>>>>> >>>>>>>>> in [myontology:property1; >>>>>>>>> myontology:property1; >>>>>>>>> myontology:enumproperty;] >>>>>>>>> >>>>>>>>> is thát the expected result? >>>>>>>>> >>>>>>>>> ****************************************************************************************************************** >>>>>>>>> >>>>>>>>> >>>>>>>>> Luis >>>>>>>>> >>>>>>>>> El mié, 17 abr 2024 a las 14:33, Holger Knublauch >>>>>>>>> (<hol...@topquadrant.com <mailto:hol...@topquadrant.com>>) escribió: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> On 17 Apr 2024, at 2:30 PM, 'Luis Enrique Ramos García' via >>>>>>>>>>> TopBraid Suite Users <topbraid-users@googlegroups.com >>>>>>>>>>> <mailto:topbraid-users@googlegroups.com>> wrote: >>>>>>>>>>> >>>>>>>>>>> Thanks for your quick answer, >>>>>>>>>>> >>>>>>>>>>> But, dear, where should I add this code?. >>>>>>>>>>> >>>>>>>>>>> Because I tried to add it in the source code panel, and it didn't >>>>>>>>>>> work, same with the script panel, >>>>>>>>>>> where I expected it should work, but it did not. >>>>>>>>>>> >>>>>>>>>>> So, I owner in which panel should I add this code?. >>>>>>>>>>> >>>>>>>>>>> I do not have any idea how to use it. >>>>>>>>>> >>>>>>>>>> Yes, it requires JS experience. There is no out-of-the-box solution >>>>>>>>>> for what you are trying to express. >>>>>>>>>> >>>>>>>>>> How many enumerations do you need? If it's just a few, I would >>>>>>>>>> suggest going ahead with manual editing of sh:in lists in the Source >>>>>>>>>> Code. >>>>>>>>>> >>>>>>>>>> Holger >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Luis >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> El mié, 17 abr 2024 a las 13:45, Holger Knublauch >>>>>>>>>>> (<hol...@topquadrant.com <mailto:hol...@topquadrant.com>>) escribió: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> On 17 Apr 2024, at 1:38 PM, 'Luis Enrique Ramos García' via >>>>>>>>>>>>> TopBraid Suite Users <topbraid-users@googlegroups.com >>>>>>>>>>>>> <mailto:topbraid-users@googlegroups.com>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> I am working with version Version: 7.5.1 (20230316-1531). >>>>>>>>>>>> >>>>>>>>>>>> Ok then the script may not work, assuming the RDFNodeUtil object >>>>>>>>>>>> was introduced later. >>>>>>>>>>>> >>>>>>>>>>>> In that case source code editing may be your best solution, unless >>>>>>>>>>>> you know how to use this >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> createList: (nodes) => { >>>>>>>>>>>> let nil = graph.namedNode(rdf.NS + 'nil'); >>>>>>>>>>>> if(nodes.length == 0) { >>>>>>>>>>>> return nil; >>>>>>>>>>>> } >>>>>>>>>>>> let root = graph.blankNode(); >>>>>>>>>>>> let current = root; >>>>>>>>>>>> nodes.forEach((node, index) => { >>>>>>>>>>>> current.add(rdf.first, node); >>>>>>>>>>>> let rest = index < nodes.length - 1 ? >>>>>>>>>>>> graph.blankNode() : nil; >>>>>>>>>>>> current.add(rdf.rest, rest); >>>>>>>>>>>> current = rest; >>>>>>>>>>>> }) >>>>>>>>>>>> return root; >>>>>>>>>>>> }, >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> I included an script panel, refreshed it, and I have this view: >>>>>>>>>>>>> <image.png> >>>>>>>>>>>>> When I run the script I can see my class, the one for which I >>>>>>>>>>>>> want to create the enum, is the result of focusNode. >>>>>>>>>>>>> >>>>>>>>>>>>> But, when I click in "Declare enumerations from instances" I get >>>>>>>>>>>>> the same result again: >>>>>>>>>>>>> >>>>>>>>>>>>> <image.png> >>>>>>>>>>>>> I have a question: >>>>>>>>>>>>> >>>>>>>>>>>>> how does my script know from which class I do want to get my >>>>>>>>>>>>> instances for the enum list?. >>>>>>>>>>>> >>>>>>>>>>>> The infrastructure around the ModifyAction will make sure that the >>>>>>>>>>>> variable focusNode points at the asset that >>>>>>>>>>>> the action was called from (in the Modify menu). >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Because I think you are using the same class color?, how do I >>>>>>>>>>>>> relate the class traffic light there? >>>>>>>>>>>>> >>>>>>>>>>>>> What I want to say is something like this: >>>>>>>>>>>>> >>>>>>>>>>>>> Product hasSize oneof Size (short, medium, large) >>>>>>>>>>>>> >>>>>>>>>>>>> And at this moment my focus is in Product, not in Size. >>>>>>>>>>>> >>>>>>>>>>>> In SHACL you can either add sh:in to a class/node shape or to a >>>>>>>>>>>> property shape. If you just want to add it to a specific property >>>>>>>>>>>> then a different script would be needed. >>>>>>>>>>>> >>>>>>>>>>>> Holger >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Luis >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> El mié, 17 abr 2024 a las 11:50, Holger Knublauch >>>>>>>>>>>>> (<hol...@topquadrant.com <mailto:hol...@topquadrant.com>>) >>>>>>>>>>>>> escribió: >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>>> On 17 Apr 2024, at 11:29 AM, 'Luis Enrique Ramos García' via >>>>>>>>>>>>>>> TopBraid Suite Users <topbraid-users@googlegroups.com >>>>>>>>>>>>>>> <mailto:topbraid-users@googlegroups.com>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I added the code at the end of the code of the target class, >>>>>>>>>>>>>>> and got this result: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> <image.png> >>>>>>>>>>>>>>> When I click in "Declare enumeration from instances, I get this >>>>>>>>>>>>>>> view: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> <image.png> >>>>>>>>>>>>>> >>>>>>>>>>>>>> This looks unexpected. What version are you on? The RDFNodeUtil >>>>>>>>>>>>>> object should be there. Maybe try the Refresh button in the >>>>>>>>>>>>>> Script Editor panel. >>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> <image.png> >>>>>>>>>>>>>>> Then, I wonder how to make the system know where my list of >>>>>>>>>>>>>>> enum values are? >>>>>>>>>>>>>> >>>>>>>>>>>>>> It will simply look at the already-existing instances of the >>>>>>>>>>>>>> currently selected class, see graph.every(focusNode) where >>>>>>>>>>>>>> focusNode is the current class. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Holger >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Luis >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> El mié, 17 abr 2024 a las 10:51, Luis Enrique Ramos García >>>>>>>>>>>>>>> (<luisenriqueramos1...@googlemail.com >>>>>>>>>>>>>>> <mailto:luisenriqueramos1...@googlemail.com>>) escribió: >>>>>>>>>>>>>>>> Hi Holger, >>>>>>>>>>>>>>>> Thanks for your answer, but to be frank I find these >>>>>>>>>>>>>>>> procedures very complicated. >>>>>>>>>>>>>>>> In my opinion the enum is a very common pattern, and I >>>>>>>>>>>>>>>> understand when to use it. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Anyway, let's try to solve the issue >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> 1. I tried to add the code by myself, but it seems there is >>>>>>>>>>>>>>>> something wrong with the code: >>>>>>>>>>>>>>>> sh:in ( >>>>>>>>>>>>>>>> myontology:value1 >>>>>>>>>>>>>>>> myontology _:value2 >>>>>>>>>>>>>>>> myontology :value3 >>>>>>>>>>>>>>>> ) ; >>>>>>>>>>>>>>>> myontology:property1; >>>>>>>>>>>>>>>> myontology:property2; >>>>>>>>>>>>>>>> myontology:enumproperty; >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Please, take in account that I edited the enum property just >>>>>>>>>>>>>>>> after the sh:in, but the editor put it at the end >>>>>>>>>>>>>>>> of the list of properties. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Part of the result was this black datatype property in >>>>>>>>>>>>>>>> properties list >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> <image.png> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> and in the undeclared property there is a list with these >>>>>>>>>>>>>>>> values: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> in >>>>>>>>>>>>>>>> [myontology:property1; >>>>>>>>>>>>>>>> myontology:property1; >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> myontology:enumproperty;] >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> is thát the expected result? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> if not, for the second option, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> where do I have to insert this code: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> focusNode.add(sh.in, >>>>>>>>>>>>>>>> RDFNodeUtil.createList(graph.every(focusNode))) >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> do I have to add this code at the beginning of the code of my >>>>>>>>>>>>>>>> ontology? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> myontology:ClassActionsGroup >>>>>>>>>>>>>>>> a dash:ActionGroup ; >>>>>>>>>>>>>>>> rdfs:label "Class actions group" ; >>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>> myontology:DeclareEnumerationFromInstances >>>>>>>>>>>>>>>> a dash:ModifyAction ; >>>>>>>>>>>>>>>> dash:actionGroup myontology:ClassActionsGroup ; >>>>>>>>>>>>>>>> dash:js "focusNode.add(sh.in <http://sh.in/>, >>>>>>>>>>>>>>>> RDFNodeUtil.createList(graph.every(focusNode)))" ; >>>>>>>>>>>>>>>> rdfs:comment "Adds a sh:in declaration that enumerates all >>>>>>>>>>>>>>>> (current) instances of the selected class." ; >>>>>>>>>>>>>>>> rdfs:label "Declare enumeration from instances" ; >>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>> rdfs:Class >>>>>>>>>>>>>>>> dash:resourceAction >>>>>>>>>>>>>>>> myontology:DeclareEnumerationFromInstances ; >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I have not done this before, if you have a tutorial or some >>>>>>>>>>>>>>>> document I could read, I would really appreciate >>>>>>>>>>>>>>>> if you can share it with me. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Best regards >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Luis Ramos >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> El mié, 17 abr 2024 a las 10:00, Holger Knublauch >>>>>>>>>>>>>>>> (<hol...@topquadrant.com <mailto:hol...@topquadrant.com>>) >>>>>>>>>>>>>>>> escribió: >>>>>>>>>>>>>>>>> Hi Luis, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> declaring an enumerated class is achieved in SHACL via sh:in. >>>>>>>>>>>>>>>>> There is no dedicated user interface for creating those >>>>>>>>>>>>>>>>> quickly, as this isn't anything that we have seen used much >>>>>>>>>>>>>>>>> so far. I guess this is because the user interface for >>>>>>>>>>>>>>>>> entering instance data is already a drop down box anyway, >>>>>>>>>>>>>>>>> typically deemed good enough. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> The main reason for creating enumerations would be to make >>>>>>>>>>>>>>>>> sure that ONLY those enumerated values will ever be >>>>>>>>>>>>>>>>> permitted. For example, the colors of a traffic light must >>>>>>>>>>>>>>>>> only be red, green, yellow, but never blue even if someone >>>>>>>>>>>>>>>>> adds such an instance later. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> To create those, you have various options. Advanced users >>>>>>>>>>>>>>>>> would use the source code panel to enter the sh:in >>>>>>>>>>>>>>>>> expression. However, similar to what we had in TBC, I think >>>>>>>>>>>>>>>>> this can be automated easily. Basically the following ADS >>>>>>>>>>>>>>>>> script produces an sh:in enumeration for the selected class: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> focusNode.add(sh.in, >>>>>>>>>>>>>>>>> RDFNodeUtil.createList(graph.every(focusNode))) >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> We can wrap this into a Modify Action (feel free to add the >>>>>>>>>>>>>>>>> below to your Ontology or a file that is included into your >>>>>>>>>>>>>>>>> ontology): >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> myontology:ClassActionsGroup >>>>>>>>>>>>>>>>> a dash:ActionGroup ; >>>>>>>>>>>>>>>>> rdfs:label "Class actions group" ; >>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>> myontology:DeclareEnumerationFromInstances >>>>>>>>>>>>>>>>> a dash:ModifyAction ; >>>>>>>>>>>>>>>>> dash:actionGroup myontology:ClassActionsGroup ; >>>>>>>>>>>>>>>>> dash:js "focusNode.add(sh.in <http://sh.in/>, >>>>>>>>>>>>>>>>> RDFNodeUtil.createList(graph.every(focusNode)))" ; >>>>>>>>>>>>>>>>> rdfs:comment "Adds a sh:in declaration that enumerates all >>>>>>>>>>>>>>>>> (current) instances of the selected class." ; >>>>>>>>>>>>>>>>> rdfs:label "Declare enumeration from instances" ; >>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>> rdfs:Class >>>>>>>>>>>>>>>>> dash:resourceAction >>>>>>>>>>>>>>>>> myontology:DeclareEnumerationFromInstances ; >>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> With this in place, you can run it from the Modify menu of >>>>>>>>>>>>>>>>> any class: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> <PastedGraphic-1.png> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> which will produce >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> myontology:Color >>>>>>>>>>>>>>>>> a owl:Class ; >>>>>>>>>>>>>>>>> a sh:NodeShape ; >>>>>>>>>>>>>>>>> rdfs:label "Color" ; >>>>>>>>>>>>>>>>> rdfs:subClassOf owl:Thing ; >>>>>>>>>>>>>>>>> sh:in ( >>>>>>>>>>>>>>>>> myontology:Green >>>>>>>>>>>>>>>>> myontology:Yellow >>>>>>>>>>>>>>>>> myontology:Red >>>>>>>>>>>>>>>>> ) ; >>>>>>>>>>>>>>>>> sh:property myontology:Color-label ; >>>>>>>>>>>>>>>>> . >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Note that sh:in isn't displayed by default on the form of >>>>>>>>>>>>>>>>> classes - again because this isn't such a commonly used >>>>>>>>>>>>>>>>> pattern. To make them visible, switch the form to Also show >>>>>>>>>>>>>>>>> undeclared properties. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> If people find this useful, we could add improvements to this >>>>>>>>>>>>>>>>> for 8.1. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Holger >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On 17 Apr 2024, at 9:32 AM, 'Luis Enrique Ramos García' via >>>>>>>>>>>>>>>>>> TopBraid Suite Users <topbraid-users@googlegroups.com >>>>>>>>>>>>>>>>>> <mailto:topbraid-users@googlegroups.com>> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I need to model an enum, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> and found this non uptodate tutorial: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> https://topbraidcomposer.org/html/Create_an_enumeration.htm >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Thus, I wonder if there is an uptodate procedure to create >>>>>>>>>>>>>>>>>> an enum in EDG? >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Thanks >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Luis >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> The topics of this mailing list include TopBraid EDG and >>>>>>>>>>>>>>>>>> related technologies such as SHACL. >>>>>>>>>>>>>>>>>> To post to this group, send email to >>>>>>>>>>>>>>>>>> topbraid-users@googlegroups.com >>>>>>>>>>>>>>>>>> <mailto:topbraid-users@googlegroups.com> >>>>>>>>>>>>>>>>>> --- >>>>>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>>>>> Google Groups "TopBraid Suite Users" group. >>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>> from it, send an email to >>>>>>>>>>>>>>>>>> topbraid-users+unsubscr...@googlegroups.com >>>>>>>>>>>>>>>>>> <mailto:topbraid-users+unsubscr...@googlegroups.com>. >>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/topbraid-users/6621d600-2195-4e9c-9b5d-58ce8172722bn%40googlegroups.com >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/topbraid-users/6621d600-2195-4e9c-9b5d-58ce8172722bn%40googlegroups.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> The topics of this mailing list include TopBraid EDG and >>>>>>>>>>>>>>>>> related technologies such as SHACL. >>>>>>>>>>>>>>>>> To post to this group, send email to >>>>>>>>>>>>>>>>> topbraid-users@googlegroups.com >>>>>>>>>>>>>>>>> <mailto:topbraid-users@googlegroups.com> >>>>>>>>>>>>>>>>> --- >>>>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>>>> Google Groups "TopBraid Suite Users" group. >>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>>>>> it, send an email to >>>>>>>>>>>>>>>>> topbraid-users+unsubscr...@googlegroups.com >>>>>>>>>>>>>>>>> <mailto:topbraid-users+unsubscr...@googlegroups.com>. >>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/topbraid-users/4F0BE51C-54CE-4A52-9929-AC5FC29A26BE%40topquadrant.com >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/topbraid-users/4F0BE51C-54CE-4A52-9929-AC5FC29A26BE%40topquadrant.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> The topics of this mailing list include TopBraid EDG and >>>>>>>>>>>>>>> related technologies such as SHACL. >>>>>>>>>>>>>>> To post to this group, send email to >>>>>>>>>>>>>>> topbraid-users@googlegroups.com >>>>>>>>>>>>>>> <mailto:topbraid-users@googlegroups.com> >>>>>>>>>>>>>>> --- >>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>> Google Groups "TopBraid Suite Users" group. >>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>>> it, send an email to >>>>>>>>>>>>>>> topbraid-users+unsubscr...@googlegroups.com >>>>>>>>>>>>>>> <mailto:topbraid-users+unsubscr...@googlegroups.com>. >>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>> https://groups.google.com/d/msgid/topbraid-users/CABy94XnxaEsBD7ybryGTSRRBCHEMmPcac%3DkEJ9bhVkSkrerQDA%40mail.gmail.com >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/topbraid-users/CABy94XnxaEsBD7ybryGTSRRBCHEMmPcac%3DkEJ9bhVkSkrerQDA%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> The topics of this mailing list include TopBraid EDG and related >>>>>>>>>>>>>> technologies such as SHACL. >>>>>>>>>>>>>> To post to this group, send email to >>>>>>>>>>>>>> topbraid-users@googlegroups.com >>>>>>>>>>>>>> <mailto:topbraid-users@googlegroups.com> >>>>>>>>>>>>>> --- >>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>> Google Groups "TopBraid Suite Users" group. >>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>> it, send an email to topbraid-users+unsubscr...@googlegroups.com >>>>>>>>>>>>>> <mailto:topbraid-users+unsubscr...@googlegroups.com>. >>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>> https://groups.google.com/d/msgid/topbraid-users/B28AB52D-74C3-42E4-8E53-5E7162F79050%40topquadrant.com >>>>>>>>>>>>>> >>>>>>>>>>>>>> <https://groups.google.com/d/msgid/topbraid-users/B28AB52D-74C3-42E4-8E53-5E7162F79050%40topquadrant.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> The topics of this mailing list include TopBraid EDG and related >>>>>>>>>>>>> technologies such as SHACL. >>>>>>>>>>>>> To post to this group, send email to >>>>>>>>>>>>> topbraid-users@googlegroups.com >>>>>>>>>>>>> <mailto:topbraid-users@googlegroups.com> >>>>>>>>>>>>> --- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google Groups "TopBraid Suite Users" group. >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>>>>> send an email to topbraid-users+unsubscr...@googlegroups.com >>>>>>>>>>>>> <mailto:topbraid-users+unsubscr...@googlegroups.com>. >>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>> https://groups.google.com/d/msgid/topbraid-users/CABy94XnEZxOr30t9e7v1nRKKHGiNBc36y9_AnGnzekM%2BAStt8g%40mail.gmail.com >>>>>>>>>>>>> >>>>>>>>>>>>> <https://groups.google.com/d/msgid/topbraid-users/CABy94XnEZxOr30t9e7v1nRKKHGiNBc36y9_AnGnzekM%2BAStt8g%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> The topics of this mailing list include TopBraid EDG and related >>>>>>>>>>>> technologies such as SHACL. >>>>>>>>>>>> To post to this group, send email to >>>>>>>>>>>> topbraid-users@googlegroups.com >>>>>>>>>>>> <mailto:topbraid-users@googlegroups.com> >>>>>>>>>>>> --- >>>>>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>>>>> Groups "TopBraid Suite Users" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>>>> send an email to topbraid-users+unsubscr...@googlegroups.com >>>>>>>>>>>> <mailto:topbraid-users+unsubscr...@googlegroups.com>. >>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>> https://groups.google.com/d/msgid/topbraid-users/944F246C-07CA-4390-9EDE-BCD018E00442%40topquadrant.com >>>>>>>>>>>> >>>>>>>>>>>> <https://groups.google.com/d/msgid/topbraid-users/944F246C-07CA-4390-9EDE-BCD018E00442%40topquadrant.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> The topics of this mailing list include TopBraid EDG and related >>>>>>>>>>> technologies such as SHACL. >>>>>>>>>>> To post to this group, send email to >>>>>>>>>>> topbraid-users@googlegroups.com >>>>>>>>>>> <mailto:topbraid-users@googlegroups.com> >>>>>>>>>>> --- >>>>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>>>> Groups "TopBraid Suite Users" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>>> send an email to topbraid-users+unsubscr...@googlegroups.com >>>>>>>>>>> <mailto:topbraid-users+unsubscr...@googlegroups.com>. >>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>> https://groups.google.com/d/msgid/topbraid-users/CABy94X%3DtQrMEKu3wzY6EB-5zZF7d-x6_JM3C3oMdzJ-AA65DFA%40mail.gmail.com >>>>>>>>>>> >>>>>>>>>>> <https://groups.google.com/d/msgid/topbraid-users/CABy94X%3DtQrMEKu3wzY6EB-5zZF7d-x6_JM3C3oMdzJ-AA65DFA%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> The topics of this mailing list include TopBraid EDG and related >>>>>>>>>> technologies such as SHACL. >>>>>>>>>> To post to this group, send email to topbraid-users@googlegroups.com >>>>>>>>>> <mailto:topbraid-users@googlegroups.com> >>>>>>>>>> --- >>>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>>> Groups "TopBraid Suite Users" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to topbraid-users+unsubscr...@googlegroups.com >>>>>>>>>> <mailto:topbraid-users+unsubscr...@googlegroups.com>. >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/topbraid-users/48BCDC9A-590F-4473-8488-71DCDC57FFDD%40topquadrant.com >>>>>>>>>> >>>>>>>>>> <https://groups.google.com/d/msgid/topbraid-users/48BCDC9A-590F-4473-8488-71DCDC57FFDD%40topquadrant.com?utm_medium=email&utm_source=footer>. >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> The topics of this mailing list include TopBraid EDG and related >>>>>>>>> technologies such as SHACL. >>>>>>>>> To post to this group, send email to topbraid-users@googlegroups.com >>>>>>>>> <mailto:topbraid-users@googlegroups.com> >>>>>>>>> --- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "TopBraid Suite Users" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to topbraid-users+unsubscr...@googlegroups.com >>>>>>>>> <mailto:topbraid-users+unsubscr...@googlegroups.com>. >>>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/topbraid-users/CABy94Xmexh4rZCPqza2q4mqkKhyvHcvRtGyb2t3ViuZjt1Tt6w%40mail.gmail.com >>>>>>>>> >>>>>>>>> <https://groups.google.com/d/msgid/topbraid-users/CABy94Xmexh4rZCPqza2q4mqkKhyvHcvRtGyb2t3ViuZjt1Tt6w%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> The topics of this mailing list include TopBraid EDG and related >>>>>>>> technologies such as SHACL. >>>>>>>> To post to this group, send email to topbraid-users@googlegroups.com >>>>>>>> <mailto:topbraid-users@googlegroups.com> >>>>>>>> --- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "TopBraid Suite Users" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>>>> an email to topbraid-users+unsubscr...@googlegroups.com >>>>>>>> <mailto:topbraid-users+unsubscr...@googlegroups.com>. >>>>>>>> To view this discussion on the web visit >>>>>>>> https://groups.google.com/d/msgid/topbraid-users/12834BB7-ADBF-4371-A8C5-BF6D28F2EEC1%40topquadrant.com >>>>>>>> >>>>>>>> <https://groups.google.com/d/msgid/topbraid-users/12834BB7-ADBF-4371-A8C5-BF6D28F2EEC1%40topquadrant.com?utm_medium=email&utm_source=footer>. >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> The topics of this mailing list include TopBraid EDG and related >>>>>>> technologies such as SHACL. >>>>>>> To post to this group, send email to topbraid-users@googlegroups.com >>>>>>> <mailto:topbraid-users@googlegroups.com> >>>>>>> --- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "TopBraid Suite Users" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>>> an email to topbraid-users+unsubscr...@googlegroups.com >>>>>>> <mailto:topbraid-users+unsubscr...@googlegroups.com>. >>>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/topbraid-users/CABy94X%3Dz1XHgbJOu4Rh8-rO7z1gxptz4cMSi8Re0KK9H2EAp2Q%40mail.gmail.com >>>>>>> >>>>>>> <https://groups.google.com/d/msgid/topbraid-users/CABy94X%3Dz1XHgbJOu4Rh8-rO7z1gxptz4cMSi8Re0KK9H2EAp2Q%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>> >>>>>> >>>>>> -- >>>>>> The topics of this mailing list include TopBraid EDG and related >>>>>> technologies such as SHACL. >>>>>> To post to this group, send email to topbraid-users@googlegroups.com >>>>>> <mailto:topbraid-users@googlegroups.com> >>>>>> --- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "TopBraid Suite Users" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>> an email to topbraid-users+unsubscr...@googlegroups.com >>>>>> <mailto:topbraid-users+unsubscr...@googlegroups.com>. >>>>>> To view this discussion on the web visit >>>>>> https://groups.google.com/d/msgid/topbraid-users/17F906D2-9365-491A-B2C4-0E61B5D42A90%40topquadrant.com >>>>>> >>>>>> <https://groups.google.com/d/msgid/topbraid-users/17F906D2-9365-491A-B2C4-0E61B5D42A90%40topquadrant.com?utm_medium=email&utm_source=footer>. >>>>> >>>>> >>>>> -- >>>>> The topics of this mailing list include TopBraid EDG and related >>>>> technologies such as SHACL. >>>>> To post to this group, send email to topbraid-users@googlegroups.com >>>>> <mailto:topbraid-users@googlegroups.com> >>>>> --- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "TopBraid Suite Users" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to topbraid-users+unsubscr...@googlegroups.com >>>>> <mailto:topbraid-users+unsubscr...@googlegroups.com>. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/topbraid-users/CABy94XmmmY5c9ifg87U%3DF36ARcS1GeMOFQ%3DZsA25PrKZUiAQKA%40mail.gmail.com >>>>> >>>>> <https://groups.google.com/d/msgid/topbraid-users/CABy94XmmmY5c9ifg87U%3DF36ARcS1GeMOFQ%3DZsA25PrKZUiAQKA%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>> >>>> >>>> -- >>>> The topics of this mailing list include TopBraid EDG and related >>>> technologies such as SHACL. >>>> To post to this group, send email to topbraid-users@googlegroups.com >>>> <mailto:topbraid-users@googlegroups.com> >>>> --- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "TopBraid Suite Users" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/topbraid-users/OlXTT8d8kwc/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> topbraid-users+unsubscr...@googlegroups.com >>>> <mailto:topbraid-users+unsubscr...@googlegroups.com>. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/topbraid-users/96FB1BF8-067D-4FF2-84BD-97F0DE0D807C%40topquadrant.com >>>> >>>> <https://groups.google.com/d/msgid/topbraid-users/96FB1BF8-067D-4FF2-84BD-97F0DE0D807C%40topquadrant.com?utm_medium=email&utm_source=footer>. >>> >>> >>> -- >>> The topics of this mailing list include TopBraid EDG and related >>> technologies such as SHACL. >>> To post to this group, send email to topbraid-users@googlegroups.com >>> <mailto:topbraid-users@googlegroups.com> >>> --- >>> You received this message because you are subscribed to the Google Groups >>> "TopBraid Suite Users" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to topbraid-users+unsubscr...@googlegroups.com >>> <mailto:topbraid-users+unsubscr...@googlegroups.com>. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/topbraid-users/CABy94Xm1_85V%2Bht5qYx4ijjcQfN2xj1%3D%2B57OUcJQ8xE4RjbHDg%40mail.gmail.com >>> >>> <https://groups.google.com/d/msgid/topbraid-users/CABy94Xm1_85V%2Bht5qYx4ijjcQfN2xj1%3D%2B57OUcJQ8xE4RjbHDg%40mail.gmail.com?utm_medium=email&utm_source=footer>. >> >> >> -- >> The topics of this mailing list include TopBraid EDG and related >> technologies such as SHACL. >> To post to this group, send email to topbraid-users@googlegroups.com >> <mailto:topbraid-users@googlegroups.com> >> --- >> You received this message because you are subscribed to the Google Groups >> "TopBraid Suite Users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to topbraid-users+unsubscr...@googlegroups.com >> <mailto:topbraid-users+unsubscr...@googlegroups.com>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/topbraid-users/AFECE5D7-8F15-4EFD-8D71-2A38E744A985%40topquadrant.com >> >> <https://groups.google.com/d/msgid/topbraid-users/AFECE5D7-8F15-4EFD-8D71-2A38E744A985%40topquadrant.com?utm_medium=email&utm_source=footer>. > > > -- > The topics of this mailing list include TopBraid EDG and related technologies > such as SHACL. > To post to this group, send email to topbraid-users@googlegroups.com > --- > You received this message because you are subscribed to the Google Groups > "TopBraid Suite Users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to topbraid-users+unsubscr...@googlegroups.com > <mailto:topbraid-users+unsubscr...@googlegroups.com>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/topbraid-users/CABy94X%3D7yLpBfTGyGak-vvgWZwKQ7%3DO0n5%3DjfC%2BbgjpRH%3DAJWg%40mail.gmail.com > > <https://groups.google.com/d/msgid/topbraid-users/CABy94X%3D7yLpBfTGyGak-vvgWZwKQ7%3DO0n5%3DjfC%2BbgjpRH%3DAJWg%40mail.gmail.com?utm_medium=email&utm_source=footer>. -- The topics of this mailing list include TopBraid EDG and related technologies such as SHACL. To post to this group, send email to topbraid-users@googlegroups.com --- You received this message because you are subscribed to the Google Groups "TopBraid Suite Users" group. To unsubscribe from this group and stop receiving emails from it, send an email to topbraid-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/topbraid-users/12F5793B-034A-432E-A12A-3F6B6A10DBEE%40topquadrant.com.
