More is better. Here my values at home:

Intel N3050 4x 1.6 GHz in an internal firewall with external Tor
application. Internet connection download 50 MBit/s, Upload 10 MBit/s.

Internal LAN performance: 90 MBit/s

My own downloads are near 50 MBit/s (less time, most time 20...30MBit/s);

Uploads near 8 MBit/s in peaks; Never theoretical limit reached.

My personal usage drives the internet line to full power, but Tor as my
MIDDLE RELAY doesn't use the full internet line power. It is dependend
from the cabability of the guard/exit partners. Cpu load is less then
20%. The traffic is symmetrical IN/OUT.

My other external middel nodes doesn't use the full internet line power
too. The cpu load is less then 10%. The hardware ist a single VPS cpu
3GHz with 512 GB RAM. This was the minimum of provider offer.

Take a look on

https://atlas.torproject.org/#search/node49

node49 is my home middle node. node49a/b are external VPS with 100MBit
connections. The usage is about 5-10 MBit/s. Cpu load about 10% in peak.


Olaf



On 20.03.2017 22:03, Farid Joubbi wrote:
>
> I have tried a Banana Pi Pro 1,2 GHz Allwinner A20 -> 10 Mbit/s max
> (debian)
>
> Beaglebone Black 1 GHz AM335x -> 12 Mbit/s max (debian)
>
> Intel NUC5CPYH Celeron N3050 1,6 GHz to 2,16 burst -> 5 Mbit/s max
> (OpenBSD)
>
>
> So I need something quite a bit more than I have already tried ;-)
>
>
>
> ------------------------------------------------------------------------
> *From:* tor-relays <tor-relays-boun...@lists.torproject.org> on behalf
> of niftybunny <ab...@to-surf-and-protect.net>
> *Sent:* 20 March 2017 21:48
> *To:* tor-relays@lists.torproject.org
> *Subject:* Re: [tor-relays] What kind of hardware do I need for my relay
>  
> Even a 1,8 ghz Atom can max out a 100mbit line … you don't need much …
>
>
> niftybunny
> ab...@to-surf-and-protect.net <mailto:ab...@to-surf-and-protect.net>
>
> Where ignorance is bliss, 'Tis folly to be wise.
>
> Thomas Gray 
>
>> On 20 Mar 2017, at 21:45, Farid Joubbi <jou...@kth.se
>> <mailto:jou...@kth.se>> wrote:
>>
>> I'm a little surprised that this kind of question is not documented
>> anywhere, or at least I have not been able to find it.
>> I have only found others asking the same question as me without
>> getting a good answer.
>> There was a quite exhaustive discussion seven years ago:
>> https://lists.torproject.org/pipermail/tor-relays/2010-August/000164.html
>>
>> This one got closed before a good answer:
>> https://tor.stackexchange.com/questions/9966/system-requirements-of-tor-relay-how-powerful-a-cpu-and-ram-should-i-use
>>
>> I am prepared to pay a pile of cash for a computer that I will
>> dedicate to run a relay.
>> I have a 100 Mbit/s symmetric connection.
>> What should I buy?
>> I don't want to buy something that has a too slow CPU that is not
>> able to push enough traffic, but I also don't want to overkill and
>> get a huge electricity bill.
>>
>> Sebastian,
>> How much CPU does your relay have/use?
>>
>>
>> ------------------------------------------------------------------------
>> *From:* tor-relays <tor-relays-boun...@lists.torproject.org
>> <mailto:tor-relays-boun...@lists.torproject.org>> on behalf of
>> Sebastian Hoffmann <sebast...@machinewithoutbrain.de
>> <mailto:sebast...@machinewithoutbrain.de>>
>> *Sent:* 17 March 2017 12:39
>> *To:* tor-relays@lists.torproject.org
>> <mailto:tor-relays@lists.torproject.org>
>> *Subject:* Re: [tor-relays] What kind of hardware do I need for my relay
>>  
>> Hi Farid,
>> I'm running my Guard / Relay on a VPS with only one core and 512MB
>> RAM. Its also hosting a blog, my own mailserver and is member of
>> pool.ntp.org <http://pool.ntp.org>
>> I haven't encountered any problems so far. It's also connected via
>> 100MBit/sec
>> You can see the stats
>> here: 
>> https://atlas.torproject.org/#details/F381D6294A93A0078B76D0DCA332133CF5C8F687
>>  I
>> experimented a bit in the last weeks with being a bridge, but I now
>> I'm back as a Relay... therefore the performance charts are not as
>> high as they have been at the end of last year.
>>  
>>
>> Am 2017-03-17 10:54, schrieb Farid Joubbi:
>>> Hello,
>>>
>>> I have been running low powered middle relays for a few years.
>>> Now I think it's time for a small upgrade.
>>> I haven't looked at computer hardware for a long time.
>>> What is the cheapest and most power efficient CPU/motherboard that
>>> can saturate 100 Mbit/s as a Tor relay?
>>>
>>> Thanks.
>>>
>>>
>>>
>>> _______________________________________________
>>> tor-relays mailing list
>>> tor-relays@lists.torproject.org <mailto:tor-relays@lists.torproject.org>
>>> https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
>> _______________________________________________
>> tor-relays mailing list
>> tor-relays@lists.torproject.org <mailto:tor-relays@lists.torproject.org>
>> https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
>
>
>
> _______________________________________________
> tor-relays mailing list
> tor-relays@lists.torproject.org
> https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays

_______________________________________________
tor-relays mailing list
tor-relays@lists.torproject.org
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays

Reply via email to