nicoleif;539689 Wrote: > I just had the same problem when switching between 16bit and 24 > bit and to fix it I had the digital relay in my Audio Note DAC > modified. It seems that some of the new DACs are reducing cost by not > installing a relay that handles high res signal.
Nasty! Are you using the coax / spdif input on the RME? That SHOULD handle sample rate switching properly... However, it sounds like your dac's are not muting properly when lock is lost. That is very bad - for the reasons you've discovered. All DAC's should be fitted with a muting circuit (usually couple of transistors - could be a relay) that prevent any signal output from the DAC when input lock is lost. There's no excuse for this - it's penny-pinching and bad design. -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Kitchen Boom, Outdoors: SB Radio ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=77822 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch