JohnSwenson;557729 Wrote: 
> The switcher that came with the SB3 was very poor. It radiated a lot of
> noise, AND sent a lot of noise back down into the AC main as well.
> There was some going into the SB3 as well, but my findings were that
> the radiated noise and the noise sent into the mains was usually far
> more of a problem.
> 
> The switcher that comes with the Touch is much better, it produces a
> lot less contamination of the environment. But its not perfect. A
> properly designed linear supply can still produce a lower noise
> environment. 
> 
> Note I'm not talking about the actual signal coming out of the Touch.
> My measurements show very little effect on the signal out from the PS
> quality. The Touch has a much better power supply immunity than the
> SB3. 
> 
> Unfortunately linear supplies are not created equal. Some can still
> produce radiated noise and send noise back into the mains. Its
> definitely possible to have a linear supply that will sound worse than
> the switcher that comes with the Touch. Because of this I'm not very
> hot on getting a cheap linear supply. While they probably can improve
> the sound of an SB3, (ANYTHING will improve the sound over that thing
> that came with the SB3) there is a good chance they would actually make
> the Touch sound worse. 
> 
> Price is not necessarily a good harbinger either. There are some
> expensive supplies that still send a fair amount of noise back into the
> mains. If you are going to get an expensive one make sure you can
> audition it first, or get a money back guarantee. 
> 
> Note that I build my own supplies so I have NOT bought commercially
> available ones, I cannot say which ones are good or not, don't ask. 
> 
> If you are a hard core audiophile and like to tweak things to get the
> absolute best sound possible, go ahead and try linear supplies. (I have
> a design for a really good one if you are interested in making your
> own.) If not, just use the supply that came with the Touch. 
> 
> John S.

Hi John

I'll bite...would it be possible to post a schematic of your favoured
supply? :)

Thanks


-- 
Tripmaster
------------------------------------------------------------------------
Tripmaster's Profile: http://forums.slimdevices.com/member.php?userid=33519
View this thread: http://forums.slimdevices.com/showthread.php?t=79977

_______________________________________________
Touch mailing list
Touch@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/touch

Reply via email to