JJZolx wrote: > The ports on the ethernet switch are all the same. Plug any device into > any port you like. > > Yes, you should be able to keep the same settings on the PC and existing > Squeezebox. > > I don't recall if the steps to configure the Transporter's network > configuration are the same, but it should be similar. Use the same > subnet of 255.255.255.0. You can use any IP address beginning with > "192.168.1." and with the last number anything from 1 to 254. Just don't > use an address that's already in use by one of the other devices. > There's no reason you need to use a number in the vicinity of 100, but > 101 would probably make sense given the existing numbering scheme. > > For the cables, normally you'd use non-crossover cables, but with modern > switches you can use either crossover or non-crossover cables and it > will work just fine.
If the SBT and Transporter ask for a gateway & DNS address as well set them both as 192.168.1.100 i.e. the address of the PC *Vortexbox LMS 7.8 music on QNAP TS419p via NFS* iThingys/iPeng/Tablets *Living Room* - SB3 -> Onkyo TS606 - > Celestion Ditton F20s - Zone 2 -> Sony TA FE 320 -> Sennheiser RS 130 & B&W P7 *Office* - RPi -> Sony TA FE320 -> Celestion F10s / SB3 -> Onkyo CRN 755 -> Wharfedale Modus Cubes *Dining Room* -> SB Boom *Kitchen* -> UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* - SB Touch -> Topping TP21 -> AKG Headphones *Bedroom (TV)* - Amazon Fire TV (SB Player) -> Topping TP20 -> Wharfedale Modus Cubes ------------------------------------------------------------------------ d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=101778 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
