Fizbin wrote: > When you hooked the Touch to Ethernet, are you sure it was connected to > the internet? Like I mentioned on the other linked thread (post #2) The > Touch _with_later_firmware_ will not proceed past the Choose Language > screen if it can not get an internet connection. With older firmware you > can bypass this screen by pressing Home button on the remote. I'm pretty > sure you can downgrade the firmware by inserting a USB drive or SD card > with the proper file, even if you can't bypass this screen. (I did it, > so you must be able to) > > I BELIEVE (not 100% sure) that the file you want is > fab4_7.8.0_r16739.bin (not the one that says r16754), which you can find > here... > > http://update-origin.slimdevices.com/update/firmware/7.8.0/ > > Otherwise just try something older like fab4_7.7.3_r16676.bin > > http://update-origin.slimdevices.com/update/firmware/7.7.7/
Yes, definitely connected to wifi. I rebooted the router, used a new and unused Ethernet cord. The Touch screen says "Verify Ethernet Connection" and stays there. Not sure how or even if I can do that. Downloaded the fab4_7.8.0_r16739.bin file you suggested. Inserted the USB stick with the file but nothing happened. How do I persude the Touch to load the file? "fab4_7.7.3_r16676.bin" did this too, same result. Absolutely everyting I try never gets the Touch to progreaa past the language screen. Frustrating eh? Thanks for your suggestions anyway. I'm grateful. Mike ------------------------------------------------------------------------ mikeos's Profile: http://forums.slimdevices.com/member.php?userid=52438 View this thread: http://forums.slimdevices.com/showthread.php?t=112228 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
